Red Tail Ale clone (partial Mash) - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Red Tail Ale clone (partial Mash)

192 calories 19.5 g 12 oz
brewer logo
Beer Stats
Method: Partial Mash
Style: American Amber Ale
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 6 gallons
Pre Boil Gravity: 1.049 (recipe based estimate)
Efficiency: 65% (brew house)
Source: https://byo.com/recipe/red-tail-ale-clone/
Calories: 192 calories (Per 12oz)
Carbs: 19.5 g (Per 12oz)
Created: Tuesday October 23rd 2018
1.058
1.014
5.8%
43.7
11.4
5.5
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
1.50 lb American - Pale 2-Row1.5 lb Pale 2-Row 37 1.8 18.8%
1 lb American - Caramel / Crystal 60L1 lb Caramel / Crystal 60L 34 60 12.5%
0.50 lb American - Victory0.5 lb Victory 34 28 6.3%
5 lb DME Golden Light (Briess)5 lb DME Golden Light (Briess) 44.6 4 62.5%
8 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.50 oz Cluster0.5 oz Cluster Hops Pellet 6.5 Boil 60 min 12.5 20%
1 oz Cascade1 oz Cascade Hops Pellet 7 Boil 30 min 20.69 40%
1 oz Cascade1 oz Cascade Hops Pellet 7 Whirlpool 0 min 10.49 40%
2.50 oz / $ 0.00
 
Yeast
Wyeast - American Ale 1056
Amount:
1 Each
Cost:
Attenuation (avg):
75%
Flocculation:
Med-Low
Optimum Temp:
60 - 72 °F
Starter:
Yes
Fermentation Temp:
69 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 95 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
fernley, nv
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
2 gal Submerge cracked malts in 1 gallon (4 L) water at 153 °F (67 °C) for 60 minutes. Remove grains and place in a colander. Infusion -- 153 °F 60 min
1 gal Wash with 1 gallon (4 L) hot water. Sparge -- 170 °F --
3 gal Add extract and top up to 6 gallons (23 L) and bring to boil. Temperature -- 212 °F --
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.59 g | 26.4 qt) 6 24  
Mash volume with grains (equipment estimates 6.59 g | 26.4 qt) 6.24 25  
Grain absorption losses (steeping) -0.38 -1.5  
Mash Lauter Tun losses -0.25 -1  
Volume increase from sugar/extract (early additions) 0.38 1.5  
Pre boil volume (equipment estimates 6.59 g | 26.4 qt) 6 24  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.06 -0.2  
Post boil volume 5.04 20.2  
Hops absorption losses (whirlpool, hop stand) -0.04 -0.2  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 6 24
Equipment Profile Used: System Default
 
Notes

https://byo.com/recipe/red-tail-ale-clone/

Mendocino Brewing Co.’s Red Tail Ale clone
(5 gallons/19 L, partial mash)
OG = 1.057 FG = 1.012
IBU = 40 SRM = 11 ABV = 6%

Ingredients
1.5 lb. (0.68 kg) 2-row pale malt
1 lb. (0.45 kg) caramel malt (60° L)
0.5 lb. (0.23 kg) Victory® malt
5 lbs. (2.3 kg) Briess extra light dried malt extract
4 AAU Cluster hop pellets (60 min.) (1/2 oz./14 g at 8% alpha acids)
7 AAU Cascade hop pellet (30 min.) (1 oz./28 g at 7% alpha acids)
1 oz. (28 g) Cascade hops (0 min.)
American ale yeast (Wyeast 1056 or White Labs WLP001 or Safale US-05)
3/4 cup corn sugar (if priming)

Step by Step
Submerge cracked malts in 1 gallon (4 L) water at 153 °F (67 °C) for 60 minutes. Remove grains and place in a colander. Wash with 1 gallon (4 L) hot water. Add extract and top up to 6 gallons (23 L) and bring to boil. Add Cluster hops, boil 30 minutes. Add Cascade pellets, boil 30 minutes. Turn off heat, add Cascade hops and stir to create a whirlpool. Allow hops to steep 20 minutes the begin to cool the wort. Put wort into your primary fermenter along with enough water to make 5.25 gallons (20 L). When cooled to 70 °F (21 °C), pitch yeast. Ferment warm (68 to 70 °F/20 to 21 °C) for ten days, rack to secondary if you so desire and condition cooler (64 °F/18 °C) for one to two weeks. Prime, bottle and age two to three weeks or keg and force carbonate.

All-grain option: Mash 11 lbs. (5 kg) pale malt, plus the Victory® and caramel as above, in 4 gallons (15 L) water at 153 °F (67 °C) for 60 minutes. Runoff and sparge with 4 gallons (15 L) or enough water to collect 6.5 gallons (24.6 L) and bring to a boil. You should not need to top up the wort in the fermenter, but time your boil and hop additions to end up with 5.25 gallons (20 L) in the kettle.

Written by Scott Russell

Last Updated and Sharing
 
536
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2018-10-23 18:49 UTC