Pfiem IPA Clone - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Pfiem IPA Clone

226 calories 23.3 g 12 oz
brewer logo
Beer Stats
Method: Partial Mash
Style: American IPA
Boil Time: 70 min
Batch Size: 4.5 gallons (fermentor volume)
Pre Boil Size: 2.4 gallons
Pre Boil Gravity: 1.128 (recipe based estimate)
Efficiency: 65% (brew house)
Source: Rustybrews
Calories: 226 calories (Per 12oz)
Carbs: 23.3 g (Per 12oz)
Created: Monday June 18th 2018
1.068
1.017
6.7%
159.1
6.4
5.5
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
5.80 lb Liquid Malt Extract - Extra Light5.8 lb Liquid Malt Extract - Extra Light 37 2.5 59.2%
2 lb United Kingdom - Maris Otter Pale2 lb Maris Otter Pale 38 3.75 20.4%
1 lb American - Munich - Light 10L1 lb Munich - Light 10L 33 10 10.2%
0.50 lb American - Carapils (Dextrine Malt)0.5 lb Carapils (Dextrine Malt) 33 1.8 5.1%
0.50 lb American - Caramel / Crystal 10L0.5 lb Caramel / Crystal 10L 35 10 5.1%
9.80 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1.20 oz Simcoe1.2 oz Simcoe Hops Pellet 13.4 Boil 70 min 34.75 10.5%
1.20 oz Columbus1.2 oz Columbus Hops Pellet 12.8 Boil 70 min 33.2 10.5%
1.50 oz Mosaic1.5 oz Mosaic Hops Pellet 12.5 Whirlpool at 150 °F 15 min 31.21 13.2%
1.50 oz Citra1.5 oz Citra Hops Pellet 11 Whirlpool at 150 °F 15 min 27.46 13.2%
1.50 oz Chinook1.5 oz Chinook Hops Pellet 13 Whirlpool at 150 °F 15 min 32.46 13.2%
4.50 oz Mix mo/ch/citra4.5 oz Mix mo/ch/citra Hops Pellet 13 Dry Hop 8 days 39.5%
11.40 oz / $ 0.00
 
Yeast
Imperial Yeast - A38 Juice
Amount:
1 Each
Cost:
Attenuation (avg):
74%
Flocculation:
Medium
Optimum Temp:
64 - 74 °F
Starter:
No
Fermentation Temp:
67 °F
Pitch Rate:
-
$ 0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Hard well water, no additives
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
5.2 qt Dunk Sparge -- 153 °F 60 min
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.53 g | 26.1 qt) 2.42 9.7  
Mash volume with grains (equipment estimates 6.53 g | 26.1 qt) 2.74 11  
Grain absorption losses (steeping) -0.5 -2  
Mash Lauter Tun losses -0.25 -1  
Volume increase from sugar/extract (early additions) 0.48 1.9  
Pre boil volume (equipment estimates 6.51 g | 26 qt) 2.4 9.6  
Boil off losses -1.75 -7  
Hops absorption losses (first wort, boil, aroma) -0.09 -0.4  
Post boil volume 4.67 18.7  
Hops absorption losses (whirlpool, hop stand) -0.17 -0.7  
Going into fermentor 4.5 18  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 2.42 9.7
Equipment Profile Used: System Default
 
Notes

Note: depending perhaps on yeast, and other minor things, this recipe is also very similar to Georgetown Bodhizafa.
Tried and true are mosaic citra combos (deschutes fresh squeezed, ft George suicide squeeze, others) and in this instance adds chinook for more citrusy grapefruit appeal. Also could use London ESB yeast, I think those others I mentioned might use that strain.

If you prefer less grapefruit essence, reduce or eliminate chinook dry hop, or go the other way if you wish.

After about 2 weeks at 40F, several people think this is my best beer of many dozens brewed. Success as a lasting recipe! Yippee!!!

Last Updated and Sharing
 
474
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2018-10-16 02:34 UTC