Funky Cold Mead-ina - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Funky Cold Mead-ina

340 calories 22.4 g 12 oz
Beer Stats
Method: Extract
Style: Open Category Mead
Boil Time: 0 min
Batch Size: 2.5 gallons (ending kettle volume)
Pre Boil Size: 2.5 gallons
Pre Boil Gravity: 1.104 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Source: Fats Schindee
Calories: 340 calories (Per 12oz)
Carbs: 22.4 g (Per 12oz)
Created: Monday May 15th 2017
1.104
1.009
12.4%
0.0
4.5
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
5.50 lb Honey5.5 lb Honey 42 2 81.5%
8 oz Maltodextrin8 oz Maltodextrin 39 0 7.4%
6 lbs / 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
12 oz Flaked Oats12 oz Flaked Oats 33 2.2 11.1%
0.00
 
Other Ingredients
Amount Name Cost Type Use Time
2 oz Wyeast Beer Nutrient Blend Other Primary --
5 ml 88% Lactic Acid Water Agt Primary --
 
Yeast
White Labs - Belgian Ale Yeast WLP550
Amount:
1 Each
Cost:
Attenuation (avg):
81.5%
Flocculation:
Medium
Optimum Temp:
68 - 78 °F
Starter:
Yes
Fermentation Temp:
64 °F
Pitch Rate:
1.5 (M cells / ml / ° P) 350 B cells required
Lacto plantarum and OYL218 All The Bretts
Amount:
1 Each
Cost:
Attenuation (avg):
0%
Flocculation:
Optimum Temp:
0 - 0 °F
Starter:
Yes
Fermentation Temp:
64 °F
Pitch Rate:
1.5 (M cells / ml / ° P) 350 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Spring water is fine, or treated/filtered tap water.
Quick Water Requirements
Water Gallons  Quarts
Water added to kettle 2.13 8.5  
Grain absorption losses (steep / mash) -0.09 -0.4  
Volume increase from sugar/extract (early additions) 0.47 1.9  
Pre boil volume 2.5 10  
Boil off losses    
Post boil volume 2.5 10  
Estimated amount in fermentor 2.5 10  
Total: 2.13 8.5
Equipment Profile Used: System Default
 
Notes

Boil water first to deoxygenate, add maltodextrin and 1 oz nutrient blend (to sanitize), cool to 170, add flaked (quick) oats, hold for 30 minutes (this supposedly locks in starches for mouthfeel, but they may be fermentable by the Brett later on... so if nothing else, it will just give them more food for the funk. I used a bag, and squeezed when done... lots of gooey goodness came out!), then cool to 100 F. Add honey and mix until dissolved well. Measure pH if able, and add 88% lactic acid to adjust pH down to ~4.5 (not required, but helps against unwanted organism contamination), and then pitch one shot of Goodbelly (lacto plantarum). Make sacc yeast starter, oxygenating and adding 1/2 oz yeast nutrient.

Let sit for 24-48 hrs (to taste, or pH reading, if you're looking for a specific level). Can boil now to kill lacto and lock in sour level (but boiling will also volalitlize some honey aromatics, so I don't plan on doing it), or just pitch sacc if you don't mind it getting more sour over time (I'd only go 24 hrs if so). Add 1/4 oz yeast nutrient when pitching sacc. Ferment temp controlled at 64-5 for first 3-4 days, degassing each day, then can warm up to room temp to finish attenuation, adding last 1/4 nutrient then. After a week or so (doesn't need to be completely dry yet), add Brett(s), and let it do its thing for a couple months...

Dry hop, or add fruit to, all or a portion, if desired, before bottling. Get creative with complementary flavors!

Last Updated and Sharing
 
1,358
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2017-05-18 19:54 UTC