Base Recipe Hop Testing Ale - Perle - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Base Recipe Hop Testing Ale - Perle

172 calories 17.8 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: American Pale Ale
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 6.5 gallons
Pre Boil Gravity: 1.040 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Source: Steve M
Calories: 172 calories (Per 12oz)
Carbs: 17.8 g (Per 12oz)
Created: Tuesday April 4th 2017
1.052
1.013
5.0%
34.1
6.6
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Dry Malt Extract - Light6 lb Dry Malt Extract - Light 42 4 92.3%
6 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
0.50 lb American - Caramel / Crystal 40L0.5 lb Caramel / Crystal 40L 34 40 7.7%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.50 oz Perle0.5 oz Perle Hops Pellet 8.2 Boil 60 min 17.1 25%
0.50 oz Cascade0.5 oz Cascade Hops Pellet 7 Boil 30 min 11.22 25%
1 oz Cascade1 oz Cascade Hops Pellet 7 Boil 5 min 5.82 50%
2 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
1 each Whirlfloc Fining Boil 15 min.
 
Yeast
Wyeast - American Ale II 1272
Amount:
1 Each
Cost:
Attenuation (avg):
74%
Flocculation:
High
Optimum Temp:
60 - 72 °F
Starter:
No
Fermentation Temp:
64 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 85 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Reverse osmosis
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.17 g | 24.7 qt) 6.1 24.4  
Mash volume with grains (equipment estimates 6.17 g | 24.7 qt) 6.14 24.5  
Grain absorption losses (steeping) -0.06 -0.3  
Volume increase from sugar/extract (early additions) 0.47 1.9  
Pre boil volume (equipment estimates 6.58 g | 26.3 qt) 6.5 26  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.08 -0.3  
Post boil volume 5 20  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 6.1 24.4
Equipment Profile Used: System Default
 
Notes

Using this base recipe to test various hop flavors. Leave the Perle and switch out only the last 2 hops.

STRAIN: 1272 AMERICAN ALE II:
Ferment at warmer temperatures to accentuate hop character with an increased fruitiness. Or, ferment cool for a clean, light citrus character. It attenuates well and is reliably flocculent, producing bright beer without filtration.

Or
STRAIN: 1332 NORTHWEST ALE:
It produces a malty and mildly fruity ale with good depth and complexity.

*********
RESULTS: Good tasting simple beer to see what the flavors of cascade really taste like. Great cheap beer for the weekend.

Last Updated and Sharing
 
1,560
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2017-09-29 04:33 UTC