Batch #16 - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Batch #16

221 calories 20.8 g 12 oz
brewer logo
Beer Stats
Method: Partial Mash
Style: Specialty IPA: Belgian IPA
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 3 gallons
Pre Boil Gravity: 1.040 (recipe based estimate)
Efficiency: 35% (brew house)
Source: Paul Richter
Calories: 221 calories (Per 12oz)
Carbs: 20.8 g (Per 12oz)
Created: Sunday January 8th 2017
1.067
1.014
7.0%
67.8
6.2
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
3 lb Liquid Malt Extract - Maris Otter3 lb Liquid Malt Extract - Maris Otter 36 4 30%
1 lb United Kingdom - Maris Otter Pale1 lb Maris Otter Pale 38 3.75 10%
6 lb Liquid Malt Extract - Maris Otter6 lb Liquid Malt Extract - Maris Otter - (late boil kettle addition) 36 4 60%
10 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.75 oz Galena0.75 oz Galena Hops Pellet 13.1 Boil 60 min 40.7 21.4%
0.50 oz Amarillo0.5 oz Amarillo Hops Pellet 8 Aroma 10 min 6.01 14.3%
0.50 oz Centennial0.5 oz Centennial Hops Pellet 8.5 Aroma 10 min 6.38 14.3%
0.75 oz Galena0.75 oz Galena Hops Pellet 13.1 Aroma 10 min 14.76 21.4%
1 oz Citra1 oz Citra Hops Pellet 11 Dry Hop 28 days 28.6%
3.50 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
2 tsp gypsum Water Agt Boil 1 hr.
1 tsp irish moss Fining Boil 15 min.
 
Yeast
Fermentis - Safale - American Ale Yeast US-05
Amount:
1 Each
Cost:
Attenuation (avg):
81%
Flocculation:
Medium
Optimum Temp:
54 - 77 °F
Starter:
No
Fermentation Temp:
59.3 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 108 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: Extra light DME       Amount: 8 oz      
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
3 gal Infusion -- 155 °F 30 min
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 5.96 g | 23.9 qt) 2.87 11.5  
Mash volume with grains (equipment estimates 5.96 g | 23.9 qt) 2.95 11.8  
Grain absorption losses (steeping) -0.13 -0.5  
Mash Lauter Tun losses -0.25 -1  
Volume increase from sugar/extract (early additions) 0.25 1  
Pre boil volume (equipment estimates 6.09 g | 24.4 qt) 3 12  
Volume increase from sugar/extract (late additions) 0.5 2  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.09 -0.4  
Post boil volume 5 20  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 2.87 11.5
Equipment Profile Used: System Default
 
Notes

started pulling out supplies at 6:25 AM started water hating at 6:34 AM.
the grain soak was kept at 155 degrees much better than other batches. 6:54 AM added the gypsum and the grain. cycled the stove between off and 2 to maintain 155 degrees. split a 6 lb MO LME and set the 3 lb. in the sink to thin. some water got in it. hope the chlorine doesn't affect the taste too much. heat on high for 5 minutes after adding malt then 4.5 for 9 minutes then 5 for 6 minutes then 4.5 for 20 minutes. put the yeast in at 11:20 AM flameout at 8:54AM. put the primary fermentor in a 14 degree garage prior to putting the yeast in. put into secondary fermentor on 1/21/17 accidently put an oz or so of LME in when I put it in the secondary. bottled on 2/4 one 750 ml, one 22 oz 44 12 oz bottles.
heated up 1 pint of h2o then added DME. let cool. last bottle has dregs so DO NOT give out. Fermented 59.3 conditioned 59.1 4 weeks

Last Updated and Sharing
 
1,036
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2017-05-27 12:41 UTC