Aromipesä DIPA - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Aromipesä DIPA

211 calories 19.6 g 330 ml
brewer logo
Beer Stats
Method: All Grain
Style: Double IPA
Boil Time: 75 min
Batch Size: 19 liters (fermentor volume)
Pre Boil Size: 25 liters
Pre Boil Gravity: 1.052 (recipe based estimate)
Efficiency: 69% (brew house)
Source: Juhani Tapanainen
Calories: 211 calories (Per 330ml)
Carbs: 19.6 g (Per 330ml)
URL: https://byo.com/mead/item/2808-hop-stands
Created: Saturday November 5th 2016
1.069
1.014
7.2%
117.2
7.4
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 kg Finland - Pale Ale Malt6 kg Pale Ale Malt 36 2 95.2%
0.30 kg Finland - Crystal Malt 1000.3 kg Crystal Malt 100 35 38 4.8%
6.30 kg / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
42 g El Dorado42 g El Dorado Hops Pellet 15.7 Boil 30 min 66.37 11.6%
28 g Cascade28 g Cascade Hops Pellet 7 Whirlpool at 100 °C 45 min 5.16 7.7%
28 g Citra28 g Citra Hops Pellet 11 Whirlpool at 100 °C 45 min 8.11 7.7%
28 g El Dorado28 g El Dorado Hops Pellet 15.7 Whirlpool at 100 °C 45 min 11.57 7.7%
28 g Mosaic28 g Mosaic Hops Pellet 12.5 Whirlpool at 77 °C 15 min 9.21 7.7%
28 g El Dorado28 g El Dorado Hops Pellet 15.7 Whirlpool at 77 °C 15 min 11.57 7.7%
28 g Cascade28 g Cascade Hops Pellet 7 Whirlpool at 77 °C 15 min 5.16 7.7%
41 g Mosaic41 g Mosaic Hops Pellet 12.5 Dry Hop 7 days 11.3%
72 g Citra72 g Citra Hops Pellet 11 Dry Hop 7 days 19.9%
39 g El Dorado39 g El Dorado Hops Pellet 15.7 Dry Hop 7 days 10.8%
362 g / $ 0.00
 
Yeast
Fermentis - Safale - American Ale Yeast US-05
Amount:
1 Each
Cost:
Attenuation (avg):
81%
Flocculation:
Medium
Optimum Temp:
12 - 25 °C
Starter:
No
Fermentation Temp:
18 °C
Pitch Rate:
-
$ 0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Helsinki, Finland
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
20 1 6 5 8 68
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
Infusion -- 68 °C 60 min
Starting Mash Thickness: 2.65 L/kg
Quick Water Requirements
Water Liters
Strike water volume at mash thickness of 2.7 L/kg 16.7
Mash volume with grains 20.9
Grain absorption losses -6.3
Remaining sparge water volume (equipment estimates 17.7 L) 15.5
Mash Lauter Tun losses -0.9
Pre boil volume (equipment estimates 27.2 L) 25
Boil off losses -7.1
Hops absorption losses (first wort, boil, aroma) -0.2
Post boil Volume 19.8
Hops absorption losses (whirlpool, hop stand) -0.8
Going into fermentor 19
Total: 32.2  
Equipment Profile Used: System Default
 
Notes

Source: https://byo.com/mead/item/2808-hop-stands
->Over the Topper DIPA

"Mash at 155 °F (68 °C) for 40 minutes. Sparge enough to collect roughly 7.5 gallons (28 L) in your kettle to achieve 6.5 gallons (25 L) at knockout.

Boil for a grand total of 75 minutes.

Just after knockout toss in the first set of knockout hops and begin the whirlpool process. You can either run your pump for 10 minutes or you can stir for a minute and then let spin down and settle. After 30 minutes have gone past after knockout, reduce wort temperature to 170 °F (77 °C) and then add the second set of hops to the hop stand and once again whirlpool. After 15 more minutes have passed, begin final cooling process.

The goal is to get at least 5.5 gallons (21 L) into your fermenter to compensate for the loss of wort which will occur during dry hopping. Make sure your primary fermenter has enough headspace to accommodate that much wort plus a large kräusen.

Pitch a healthy dose of yeast when wort hits 65 °F (18 °C).

After final gravity has been achieved, add a clarifying agent such as polyclar. Allow three days for clarifying agent to work, then add first set of dry hops to primary fermenter. After 7 days, rack beer off dry hops & yeast cake either into a keg or secondary fermenter. Try to purge with carbon dioxide if available to you. Add second round of dry hops and wait 5 days. Bottle or begin carbonation process."

Last Updated and Sharing
 
1,035
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2016-11-30 20:09 UTC