Yack's Imperial Pale Ale - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Yack's Imperial Pale Ale

246 calories 25.7 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: American Pale Ale
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 3 gallons
Pre Boil Gravity: 1.116 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Source: Michaael Faircloth
Calories: 246 calories (Per 12oz)
Carbs: 25.7 g (Per 12oz)
Created: Saturday January 16th 2016
1.074
1.019
7.3%
34.1
10.6
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
8 lb Dry Malt Extract - Extra Light8 lb Dry Malt Extract - Extra Light 42 2.5 84.2%
0.50 lb Brown Sugar0.5 lb Brown Sugar - (late boil kettle addition) 45 15 5.3%
8.50 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb American - Caramel / Crystal 60L1 lb Caramel / Crystal 60L 34 60 10.5%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1.50 oz Centennial1.5 oz Centennial Hops Pellet 9.3 Boil 60 min 29.31 37.5%
1 oz Cascade1 oz Cascade Hops Pellet 6.3 Boil 10 min 4.8 25%
0.50 oz Cascade0.5 oz Cascade Hops Pellet 6.3 Boil 0 min 12.5%
1 oz Cascade1 oz Cascade Hops Pellet 6.3 Dry Hop 7 days 25%
4 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
1 tsp Irish Moss Fining Boil 20 min.
 
Yeast
Wyeast - American Ale 1056
Amount:
1 Each
Cost:
Attenuation (avg):
75%
Flocculation:
Med-Low
Optimum Temp:
60 - 72 °F
Starter:
No
Fermentation Temp:
68 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 119 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: Priming Sugar       Amount: 4oz      
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.08 g | 24.3 qt) 2.5 10  
Mash volume with grains (equipment estimates 6.08 g | 24.3 qt) 2.58 10.3  
Grain absorption losses (steeping) -0.13 -0.5  
Volume increase from sugar/extract (early additions) 0.62 2.5  
Pre boil volume (equipment estimates 6.58 g | 26.3 qt) 3 12  
Volume increase from sugar/extract (late additions) 0.04 0.1  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.11 -0.5  
Post boil volume 5 20  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 2.5 10
Equipment Profile Used: System Default
 
Notes

Place grain in bag and in 3gal.water.
Heat pot and stir every 5min.
Pull bag when water hits 170degrees.
As water begins to boil pull pot off heat.
Stir in malt extract and return to heat.
Bring to boil after 5 minutes start 1-hour boil.
Stir wort clockwise for 2min. Allow to sit for 10min.
Cool wort ot 170-175.
Transfer to fermenter and aerate for 1min.
Top off to 5 gal.
After 1-2 days. (When fermentation takes off) add brown sugar after dissolving into 2cups of boiling water.
After bubbling stops in air lock add dry hops.
After about 10days you should be ready to package.
When bottling add 4oz priming sugar to 1cup boiling water and add to bottling bucket.

Last Updated and Sharing
 
874
Views
1
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2016-01-17 15:31 UTC