Bloody Red Wheat - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Bloody Red Wheat

184 calories 16.9 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: California Common Beer
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 4 gallons
Pre Boil Gravity: 1.077 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Source: Blanchbrew
Calories: 184 calories (Per 12oz)
Carbs: 16.9 g (Per 12oz)
Created: Friday August 7th 2015
1.056
1.011
6.0%
29.9
13.6
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Dry Malt Extract - Wheat6 lb Dry Malt Extract - Wheat 42 3 75%
1 lb Cane Sugar1 lb Cane Sugar 46 0 12.5%
7 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb American - Caramel / Crystal 120L1 lb Caramel / Crystal 120L 33 120 12.5%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
2 oz Liberty2 oz Liberty Hops Pellet 4 Boil 60 min 21.61 66.7%
1 oz Liberty1 oz Liberty Hops Pellet 4 Boil 30 min 8.3 33.3%
3 oz / $ 0.00
 
Yeast
Fermentis - Safale - American Ale Yeast US-05
Amount:
1 Each
Cost:
Attenuation (avg):
81%
Flocculation:
Medium
Optimum Temp:
54 - 77 °F
Starter:
No
Fermentation Temp:
70 °F
Pitch Rate:
-
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: corn sugar       Amount: 3/4 cup      
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
80 5 25 75 80 100
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.7 g | 26.8 qt) 3.58 14.3  
Mash volume with grains (equipment estimates 6.7 g | 26.8 qt) 3.66 14.7  
Grain absorption losses (steeping) -0.13 -0.5  
Volume increase from sugar/extract (early additions) 0.54 2.2  
Pre boil volume (equipment estimates 7.11 g | 28.5 qt) 4 16  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.11 -0.5  
Post boil volume 5.5 22  
Going into fermentor 5.5 22  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 3.58 14.3
Equipment Profile Used: System Default
 
Notes

Brewed on july 20th normal brew 1.steep grains.30 min 154degrees 2. add water to 4 gallons. 3.bring to boil. 4.take off burner stir in dry malt extract. 5. bring to boil again watching for hot break. 6. once boiling start timer and add first hops addition.7. At 30 next hop addition.8. At 10 add a yeast nutrient. (I use some stuff called fermax.) Flame out ......Now every thing must be SANITARY. Stir spoon Pot lid Scissors straining bag fermintor/Lid, bubbler I still cool with ice. 9.coll till your temp is around 60/65 degrees, 10. (FINALLY) Pitch yeast. Ferminting should be done in the dark cover your ferminter.

Last Updated and Sharing
 
965
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2015-08-07 19:54 UTC