Z-Dust - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Z-Dust

224 calories 15.8 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: American Pale Ale
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 3.5 gallons
Pre Boil Gravity: 1.099 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Source: Jim Wagener
Calories: 224 calories (Per 12oz)
Carbs: 15.8 g (Per 12oz)
Created: Wednesday July 15th 2015
1.069
1.007
8.2%
123.2
7.3
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Dry Malt Extract - Pilsen6 lb Dry Malt Extract - Pilsen 42 2 63.2%
1.50 lb Cane Sugar1.5 lb Cane Sugar 46 0 15.8%
7.50 lbs / 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
0.50 lb American - Caramel / Crystal 10L0.5 lb Caramel / Crystal 10L 35 10 5.3%
0.50 lb American - Caramel / Crystal 60L0.5 lb Caramel / Crystal 60L 34 60 5.3%
0.50 lb German - Munich Light0.5 lb Munich Light 37 6 5.3%
0.50 lb German - Carapils0.5 lb Carapils 35 1.3 5.3%
0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Citra1 oz Citra Hops Pellet 11 Boil 60 min 26.97 16.7%
1 oz Citra1 oz Citra Hops Pellet 11 Boil 50 min 25.65 16.7%
1 oz Citra1 oz Citra Hops Pellet 11 Boil 40 min 23.68 16.7%
1 oz Citra1 oz Citra Hops Pellet 11 Boil 30 min 20.73 16.7%
1 oz Citra1 oz Citra Hops Pellet 11 Boil 20 min 16.34 16.7%
1 oz Citra1 oz Citra Hops Pellet 11 Boil 10 min 9.78 16.7%
6 oz / 0.00
 
Yeast
White Labs - Champagne Yeast WLP715
Amount:
1 Each
Cost:
Attenuation (avg):
90%
Flocculation:
Low
Optimum Temp:
70 - 75 °F
Starter:
Yes
Fermentation Temp:
72 °F
Pitch Rate:
0.5 (M cells / ml / ° P) 159 B cells required
Safale S-04
Amount:
1 Each
Cost:
Attenuation (avg):
0%
Flocculation:
Optimum Temp:
0 - 0 °F
Starter:
Yes
Fermentation Temp:
72 °F
Pitch Rate:
0.5 (M cells / ml / ° P) 159 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
39 13 9 15 28 111
Chicago water 2014.

39 13 9 15 28 111 (CaCO3) 7.81ph.

if in Chicago, burton salts not really needed. if you have soft/softer water, would recommend the salts, one packet for the 5 gallons.
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.4 g | 25.6 qt) 3.17 12.7  
Mash volume with grains (equipment estimates 6.4 g | 25.6 qt) 3.33 13.3  
Grain absorption losses (steeping) -0.25 -1  
Volume increase from sugar/extract (early additions) 0.58 2.3  
Pre boil volume (equipment estimates 6.73 g | 26.9 qt) 3.5 14  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.23 -0.9  
Post boil volume 5 20  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 3.17 12.7
Equipment Profile Used: System Default
 
Notes

one of many clones, I know. but becoming a favorite in light of how little 3floyds brews/puts on the shelves etc.

1L starter (the day/afternoon before) 1L hot water to dissolve 1/3 cup of sugar and 1/3 cup of the DME. let cool to 80-100 degrees. pitch whole pack of Safale S-04 (optional: and, in addition to the S-04 add about a 1/4 to a half packet of champagne yeast for a higher ABV and a dryer finish)top with air lock or fairly loose bottle top, should see and hear bubble and fermentation within hours (often much sooner) let sit over night.

next day bring 3.5 Gallons (or biggest pot you have with a minimum of like 4" (preferably 6" or more) of clear between top of pot and top of water. to 158 degrees - steep all the (milled) grains.

bring to boil and dissolve the dme and the sugar. when the boil starts to bubble and or foam turn down just a bit to a rolling boil, or just low enough to not boil over while stirring often. add the first 1oz. of hops and start the clock. add an ounce every 10 min after.

cool/let cool and dump into the remaining 2 gallons of cool water (already in the fermenter) cool until approx. 72-78 degrees, pitch / pour in the starter.

let ferment for 1-2 weeks. you could rack it to a secondary after a week, but I've heard and read in blogs etc. that is the preferred method; and after many batches found that leaving it in for a full 2 weeks is just fine.

after 2 week rack into bottling bucket and prime with 3/4 cup corn sugar just prior to bottling.

it's fine to taste at 2 weeks but will be totally ready to go after 4-6. the ABV (shown above) at 8.17% and 123 ibu is a little bit high, but very attainable. I've consistently gotten around 7.56% and right around 100 IBU's every time. (this is 4th batch with very little variation / tinkering with the grain bill a little bit to lighten the color, but little else.)

... So (starting with a pretty easy recipe) a good hearty ale, with a more than substantial ABV and a big hop hit.


enjoy!!

Last Updated and Sharing
 
886
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2015-07-15 18:54 UTC