Stone Ruination Clone - Extract - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Stone Ruination Clone - Extract

257 calories 23.2 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: California Common Beer
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 2.5 gallons
Pre Boil Gravity: 1.072 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Calories: 257 calories (Per 12oz)
Carbs: 23.2 g (Per 12oz)
Created: Wednesday July 8th 2015
1.078
1.015
8.3%
118.4
6.5
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
4 lb Dry Malt Extract - Extra Light4 lb Dry Malt Extract - Extra Light 42 2.5 40%
5 lb Dry Malt Extract - Extra Light5 lb Dry Malt Extract - Extra Light - (late boil kettle addition) 42 2.5 50%
9 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb American - Caramel / Crystal 20L1 lb Caramel / Crystal 20L 35 20 10%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1.75 oz Magnum1.75 oz Magnum Hops Pellet 15 Boil 60 min 81.8 25.9%
1 oz Centennial1 oz Centennial Hops Pellet 10 Boil 30 min 23.95 14.8%
1 oz Centennial1 oz Centennial Hops Pellet 10 Boil 10 min 11.3 14.8%
1 oz Centennial1 oz Centennial Hops Pellet 10 Boil 1 min 1.34 14.8%
2 oz Centennial2 oz Centennial Hops Pellet 10 Dry Hop 7 days 29.6%
6.75 oz / $ 0.00
 
Yeast
Fermentis - Safale - American Ale Yeast US-05
Amount:
1 Each
Cost:
Attenuation (avg):
81%
Flocculation:
Medium
Optimum Temp:
54 - 77 °F
Starter:
No
Fermentation Temp:
64 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 125 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.1 g | 24.4 qt) 2.31 9.3  
Mash volume with grains (equipment estimates 6.1 g | 24.4 qt) 2.39 9.6  
Grain absorption losses (steeping) -0.13 -0.5  
Volume increase from sugar/extract (early additions) 0.31 1.2  
Pre boil volume (equipment estimates 6.29 g | 25.2 qt) 2.5 10  
Volume increase from sugar/extract (late additions) 0.39 1.6  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.18 -0.7  
Post boil volume 5 20  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 2.31 9.3
Equipment Profile Used: System Default
 
Notes

Recipe Type: All Grain
Yeast: Pacman
Yeast Starter: Absolutely
Batch Size (Gallons): 5.00
Original Gravity: 1.077
Final Gravity: 1.013
IBU: 103+
Boiling Time (Minutes): 60
Color: 7
Primary Fermentation (# of Days & Temp): 14 days at 62
Additional Fermentation: Time in the keg
Secondary Fermentation (# of Days & Temp): 1 week at 65 (dryhopping)
Tasting Notes: Very much like Stone Ruination, and it turned out really good!

14 lbs Pale Malt (2 Row) US (2.0 SRM) Grain 93.33 %
1 lbs Caramel/Crystal Malt - 20L (20.0 SRM) Grain 6.67 %

1.75 oz Magnum [14.00 %] (60 min) Hops 73.2 IBU
1.00 oz Centennial [9.60 %] (30 min) Hops 22.1 IBU
1.00 oz Centennial [9.60 %] (10 min) Hops 10.4 IBU
1.00 oz Centennial [9.60 %] (1 min) Hops 1.2 IBU
2.00 oz Centennial [9.60 %] (Dry Hop 7 days) Hops -

1 Pkgs Pacman Yeast (Wyeast) [Starter 50 ml] [Cultured] Yeast-Ale

You could use any well-attenuating clean ale yeast. WLP001, or Wyeast 1056 come to mind, or S05 for dry.

Mash at 152.
My beers seem to attenuate really well- so use a lower mash temp if you've have attenuation problems in the past. I got about 82% attenuation with the pacman yeast.

For extract, a full boil would be the same but use 8 pounds light or extra light DME.
For an extract batch with a 2.5 gallon boil, do this:
4 pounds DME
1 pound crystal 20
4 pounds DME (added at flame out)
Hopping the same.

Last Updated and Sharing
 
1,909
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2015-07-08 16:05 UTC