Zach Hogan
Amount | Fermentable | Cost | PPG | °L | Bill % |
---|---|---|---|---|---|
4.50 lb | Briess Golden Light Liquid Malt Extract | 35 | 8 | 40.9% | |
1 lb | Caramel/Crystal Malt - 10L | 35 | 10 | 9.1% | |
1 lb | Caramel/Crystal Malt - 40L | 34 | 40 | 9.1% | |
4.50 lb | Briess Golden Light Liquid Malt Extract | 35 | 8 | 40.9% | |
11 lbs / $ 0.00 |
Amount | Variety | Cost | Type | AA | Use | Time | IBU | Bill % |
---|---|---|---|---|---|---|---|---|
0.20 oz | Columbus | Pellet | 13.5 | Boil | 60 min | 5% | ||
0.20 oz | Cascade | Pellet | 5.5 | Boil | 60 min | 5% | ||
0.20 oz | Simcoe | Pellet | 13 | Boil | 60 min | 5% | ||
0.20 oz | Centennial | Pellet | 10 | Boil | 60 min | 5% | ||
0.20 oz | Amarillo | Pellet | 8.5 | Boil | 60 min | 5% | ||
0.40 oz | Columbus | Pellet | 13.5 | Boil | 30 min | 10% | ||
0.40 oz | Cascade | Pellet | 5.5 | Boil | 30 min | 10% | ||
0.40 oz | Simcoe | Pellet | 13 | Boil | 30 min | 10% | ||
0.40 oz | Centenial | Pellet | 10.3 | Boil | 30 min | 10% | ||
0.40 oz | Amarillo | Pellet | 8.5 | Boil | 30 min | 10% | ||
0.20 oz | Columbus | Pellet | 13.5 | Boil | 5 min | 5% | ||
0.20 oz | Cascade | Pellet | 5.5 | Boil | 5 min | 5% | ||
0.20 oz | Simcoe | Pellet | 13 | Boil | 5 min | 5% | ||
0.20 oz | Centennial | Pellet | 10 | Boil | 5 min | 5% | ||
0.20 oz | Amarillo | Pellet | 8.5 | Boil | 5 min | 5% | ||
4 oz / $ 0.00 |
White Labs - California Ale Yeast WLP001 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||
$ 0.00 |
Water | Gallons | Quarts |
---|---|---|
Heat water added to kettle (equipment estimates 8.03 g | 32.1 qt) | 6.38 | 25.5 |
Mash volume with grains (equipment estimates 8.03 g | 32.1 qt) | 7.26 | 29 |
Grain absorption losses (steeping) | -1.38 | -5.5 |
Pre boil volume (equipment estimates 6.65 g | 26.6 qt) | 5 | 20 |
Boil off losses | -1.5 | -6 |
Hops absorption losses (first wort, boil, aroma) | -0.15 | -0.6 |
Post boil volume | 5 | 20 |
Going into fermentor | 5 | 20 |
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ. | ||
Total: | 6.38 | 25.5 |
Equipment Profile Used: | System Default |