Peachtree IPA Clone - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Peachtree IPA Clone

191 calories 18.7 g 12 oz
brewer logo
Beer Stats
Method: Partial Mash
Style: No Profile Selected
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 3 gallons
Post Boil Size: 3 gallons
Pre Boil Gravity: 1.096 (recipe based estimate)
Post Boil Gravity: 1.096 (recipe based estimate)
Efficiency: 75% (brew house)
Calories: 191 calories (Per 12oz)
Carbs: 18.7 g (Per 12oz)
Created: Sunday June 25th 2023
1.058
1.013
5.8%
49.3
8.7
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
3.50 lb Dry Malt Extract - Extra Light3.5 lb Dry Malt Extract - Extra Light 42 2.5 44.9%
3.30 lb Liquid Malt Extract - Munich3.3 lb Liquid Malt Extract - Munich 35 8 42.3%
8 oz American - Caramel / Crystal 20L8 oz Caramel / Crystal 20L 35 20 6.4%
8 oz American - Caramel / Crystal 40L8 oz Caramel / Crystal 40L 34 40 6.4%
7.80 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Nugget1 oz Nugget Hops Pellet 14 Boil 60 min 35.15 25%
1 oz Simcoe1 oz Simcoe Hops Pellet 12.7 Boil 5 min 6.36 25%
1 oz Amarillo1 oz Amarillo Hops Pellet 10.4 Whirlpool 0 min 7.79 25%
1 oz Citra1 oz Citra Hops Pellet 11 Dry Hop 0 days 25%
4 oz / $ 0.00
 
Yeast
Danstar - Nottingham Ale Yeast
Amount:
1 Each
Cost:
Attenuation (avg):
77%
Flocculation:
High
Optimum Temp:
57 - 70 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 95 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
2 gal Steeping 160 °F 160 °F 20 min
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 4.15 g | 16.6 qt) 2.57 10.3  
Mash volume with grains (equipment estimates 4.15 g | 16.6 qt) 2.65 10.6  
Grain absorption losses (steeping) -0.13 -0.5  
Mash Lauter Tun losses -0.25 -1  
Volume increase from sugar/extract (early additions) 0.55 2.2  
Pre boil volume (equipment estimates 4.58 g | 18.3 qt) 3 12  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.08 -0.3  
Post boil volume 3 12  
Hops absorption losses (whirlpool, hop stand) -0.04 -0.2  
Top off amount 2.04 8.2  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 4.61 18.4
Equipment Profile Used: System Default
 
Notes

Recipe follows BYO clone recipe for malts, and Beer and Brewing clone for hops.

BYO instructions state:
Steep the crushed grain in 2 gallons (7.6 L) of water as it warms until a temperature of about 170 °F (77 °C) is reached, or approximately 20 minutes. Remove the grains from the wort and rinse with 4 quarts (3.7 L) of hot water. Add the liquid to reach a total of 3 gallons (11.3 L) in the brew pot and bring the wort to a boil. Turn off the heat, add the liquid malt extract, and stir until completely dissolved. Return to heat and add the Nugget hops. With 15 minutes remaining in the boil, add the dried malt extract and yeast nutrients. Add the Simcoe® hop addition with five minutes remaining in the boil. After turning off the heat, add the Amarillo® hops and then rapidly chill the wort to room temperature. Transfer to a fermenter and top off to 5.5 gallons (21 L).
Pitch the yeast when the temperature of the wort is about 68 °F (20 °C).

Last Updated and Sharing
 
150
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2023-06-25 18:21 UTC