Amber Lamps 2022 - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Amber Lamps 2022

199 calories 20.5 g 12 oz
brewer logo
Beer Stats
Method: All Grain
Style: American Amber Ale
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 8 gallons
Post Boil Size: 6 gallons
Pre Boil Gravity: 1.045 (recipe based estimate)
Post Boil Gravity: 1.060 (recipe based estimate)
Efficiency: 65% (brew house)
Calories: 199 calories (Per 12oz)
Carbs: 20.5 g (Per 12oz)
Created: Tuesday November 15th 2022
Similar Recipes

blaster

by texranger

OG: 1.053 FG: 1.010 ABV: 5.7% IBU: 65

1.060
1.015
5.9%
56.2
14.6
5.3
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
9 lb US - Pale 2-Row9 lb Pale 2-Row 37 1.8 62.9%
2 lb Munich - Light 10L2 lb Munich - Light 10L 33 10 14%
2 lb American - Victory2 lb Victory 34 28 14%
1 lb Caramel / Crystal 60L1 lb Caramel / Crystal 60L 34 60 7%
5 oz German - Acidulated Malt5 oz Acidulated Malt 27 3.4 2.2%
14.31 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.80 oz Warrior0.8 oz Warrior Hops Pellet 15.4 Boil 30 min 34.17 16.7%
1 oz Cascade1 oz Cascade Hops Pellet 7 Boil 10 min 9.16 20.8%
1 oz Centennial1 oz Centennial Hops Pellet 9.8 Boil 10 min 12.82 20.8%
1 oz Cascade1 oz Cascade Hops Pellet 7 Boil 0 min 20.8%
1 oz Centennial1 oz Centennial Hops Pellet 9.8 Boil 0 min 20.8%
4.80 oz / $ 0.00
 
Yeast
RVA Yeast Labs - RVA 132 Manchester Ale
Amount:
1 Each
Cost:
Attenuation (avg):
72.5%
Flocculation:
High
Optimum Temp:
65 - 72 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 107 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.52 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
3.5 gal Infusion -- 150 °F 60 min
4 gal Sparge -- 170 °F 60 min
Starting Mash Thickness: 1.5 qt/lb
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.5 qt/lb 5.37 21.5  
Mash volume with grains 6.51 26  
Grain absorption losses -1.79 -7.2  
Remaining sparge water volume (equipment estimates 3.85 g | 15.4 qt) 4.67 18.7  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 7.18 g | 28.7 qt) 8 32  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.18 -0.7  
Post boil Volume (equipment estimates 5.5 g | 22 qt) 6 24  
WARNING: Exceeded batch size - reduce boil size    
Going into fermentor (equipment estimates 6 g | 24 qt) 5.5 22  
Total: 10.04 40.2
Equipment Profile Used: System Default
 
Notes

=================================
11/15/2022
rebooting this again. going back to cascade and centennial combo. considering a more ipa water profile to boost bitterness? not sure....

adjusting volumes, efficiencies, etc. adding acid malt for ph.

i like continuing with the english yeast idea

could consider doing a small dry hop, 1-2 ounces. especially if no water profile it will be less sharp so might could use a little more hop boost.

=================================
11/2/2020.
ok well yet again this will not turn out like the original.....brewed this on 10/28. took pre boil gravity at 1.055 but forgot to take OG. based on that i am adjusting the recipe here to get to 1055 pre boil gravity and adjsuting the volumes. also on brew day i was missing cascade so i substituted with tahoma which im predicting to be kind of citrusey? maybe not fitting for amber ale but oh well.

note to self. might have discrepency with water profile versus whats coming from my tap. predicted 5.53 but measured 5.32.

before these changes, on brew day this recipe was sitting at :
pre boil size 7 gal
post boil size (not set)
batch size fermenter 5
efficiency 64%
pre boil SG 1.047
post boil OG 1.065
for a 6.6% abv
=================================
10/3/2020
resurrecting this old one. keep in mind i brewed it a 2nd time with adjustments (called his shoe broke) but i remember it being subpar. going back to this recipe. will try to do some work on the water profile (for malty? or hoppy?)
everything else looks fine actually. it maybe could use a little more hops but also for amber ale its probably fine like this. there were notes in the other recipe about mashing a little higher. maybe like 152 or 153? needs some research for confirmation. could maybe use rva manchester also since ill be using it for another brew.
=================================
initial recipe notes 12/7/18 : referenced bells amber ale recipe from brew your own december 2018. im reading the victory has higher diastatic power than munich so im going to use more of that. aiming for about 6% and 45 IBU using magnum cascade and centennial based on this amazing beer i had while in california last weekend called daylight by track 7 brewing in sacramento.

Last Updated and Sharing
 
508
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2022-11-15 16:48 UTC
  • Snapshot Created: 2022-11-15 16:42 UTC
  • Link To Parent Recipe