cashmere pale ale - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

cashmere pale ale

158 calories 11.2 g 12 oz
brewer logo
Beer Stats
Method: All Grain
Style: American Pale Ale
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 6.5 gallons
Post Boil Size: 6 gallons
Pre Boil Gravity: 1.045 (recipe based estimate)
Post Boil Gravity: 1.049 (recipe based estimate)
Efficiency: 57% (brew house)
Calories: 158 calories (Per 12oz)
Carbs: 11.2 g (Per 12oz)
Created: Saturday October 22nd 2022
Similar Recipes

Smashed Mosaic

by matlab_

OG: 1.054 FG: 1.009 ABV: 5.9% IBU: 39

Resilience Bushfire XPA

by TwoHeadsBrewing

OG: 1.050 FG: 1.009 ABV: 5.4% IBU: 39

City of Dreams Clone #1

by Coolhands1

OG: 1.061 FG: 1.016 ABV: 6.0% IBU: 38

1.049
1.005
5.7%
46.5
4.1
5.4
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
11.50 lb US - Pale 2-Row11.5 lb Pale 2-Row 37 1.8 89.3%
1 lb American - Carapils (Dextrine Malt)1 lb Carapils (Dextrine Malt) 33 1.8 7.8%
6 oz German - Acidulated Malt6 oz Acidulated Malt 27 3.4 2.9%
12.87 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.70 oz Magnum0.7 oz Magnum Hops Pellet 14.4 Boil 60 min 36.49 12.3%
1 oz Yakima Valley Hops - Cashmere1 oz Cashmere Hops Pellet 5.6 Boil 15 min 10.06 17.5%
2 oz Yakima Valley Hops - Cashmere2 oz Cashmere Hops Pellet 5.6 Boil 0 min 35.1%
2 oz Yakima Valley Hops - Cashmere2 oz Cashmere Hops Pellet 5.6 Dry Hop 3 days 35.1%
5.70 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
3 g Calcium Chloride (dihydrate) Water Agt Mash 1 hr.
3 g Epsom Salt Water Agt Mash 1 hr.
5 g Gypsum Water Agt Mash 1 hr.
 
Yeast
Fermentis - Safale - American Ale Yeast US-05
Amount:
1 Each
Cost:
Attenuation (custom):
90%
Flocculation:
Medium
Optimum Temp:
54 - 77 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 89 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.65 Volumes
 
Target Water Profile
Light colored and hoppy
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
75 5 10 50 150 0
Mash Chemistry and Brewing Water Calculator
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.5 qt/lb 4.83 19.3  
Mash volume with grains 5.86 23.4  
Grain absorption losses -1.61 -6.4  
Remaining sparge water volume (equipment estimates 4.17 g | 16.7 qt) 3.53 14.1  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 7.14 g | 28.6 qt) 6.5 26  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.14 -0.6  
Post boil Volume (equipment estimates 5.5 g | 22 qt) 6 24  
WARNING: Exceeded batch size - reduce boil size    
Going into fermentor (equipment estimates 6 g | 24 qt) 5.5 22  
Total: 8.36 33.4
Equipment Profile Used: System Default
 
Notes

==============================
10/21/22
rebrewing this for cashmere, turning down the gravity, doing a half RO solution plus minerals...should be good. need to check on yeast, this may get brewed on kviek and in a bucket
==============================
9/14/2022
beer came out great, belma hops are delicious. the FG was down to 1005 making the abv on the high side and the body kind of thin and even the color is pretty light. next time for pale ale, should add some crystal malt to give a little more depth in color and body. also consider mashing higher or not as long and maybe do mashout. i think current mash is creating sugars that are a little too fermentable?

==============================
9/1/2022
brew night last night. the BIAB went well, no sparge. the volume came out exactly as BF predicted, although it boiled down from 6.5 to under 5 gallons in an hour, so need to account for that next time. it was orignally 1070 OG, topped up to 5 gallons for 1060, then topped up more to about 5.5 or maybe 5.66 for 1055. (did not want to end up at 1060, too strong for this beer and would require more hops for balance, at that point making it an ipa)

decided on a whim to add a little more bittering hops to end up at the upper range of IBU. my lighter beers using tap water in general come out on the sweet side but most times that is without water adjustments.

last minute decided to switch to us05 instead of voss


==============================
8/31/2022
starting up another pale. the last one i vaguely remember coming out bad, cant remember why though. maybe somethign to do with yeast, not sure. but the base recipe is fine...

the water adjustments are as good as its gonna get on tap water. this beer would probably be much better with RO water and more precise adjustments...

changing for belma hops this time and adjusting efficiency for GF, i think i will do a true BIAB style mash today. so adding a little more to malt bill just in case
==============================
3/14/2022
repurposing for huell melon pale ale. with updated water profile results from ward, my water profile for this beer now looks a bit out of wack by the numbers but it worked well for the last beer so im just going to roll with it for now until i have time to figure out how to fix it.
==============================
2/8/2022
This lutra is taking forever. Tonight its 10 brix which is like 1026 and 4.6%. Tastes sweet. Still bubbling smh
==============================
2/3/2022
measured 1060 OG i think i got more than 5.5 gallons. i accidentally grained into my entire volume of hot liquor. after mash i sparged a little with about 1.5 or 2 gallons of cold water. pre boil vol was like 8.5 gallons
==============================
2/1/2022
revamping summer madness for this beer which will feature mighty axe julius hops instead of cascade. going with lutra again.

==============================
9/13/2021
last week measured 1013 FG for 4.8%abv. but it does not taste that light. nice body and carapils flavor, also the dry hop was faint but nice. could maybe use more dry hop but in the interest of keeping it light and cheap and not-session-ipa, i think its perfect just like this.
==============================
9/1/2021 - brew day
Not too confident on 70% eff dropping to 60, bumping 2row from 975 to 1150. Should do better with water but i think I'm gonna use tap and leave out acid
==============================
7/22/2021
Just had Port City Essential Pale Ale recently which has to be the tastiest pale ale on the planet...at very least it is one of my absolute favorite beers. this time it strikes me that it has a lot of not bitter hop flavor and decent backbone while still being 5.5%.

Their website says 35ibu so im knocking down the warrior contribution from 0.75 to 0.4oz. Adding more cascade in the flameout and dry hop (1oz-->2oz)

consider going 3oz in dry hop. maybe some pilsner malt or something else to add more malt backbone. vienna? but the carapils might be fine. at least to start.

need to review water. would like to use tap and adjust but unsure rn, been having off mash pH readings and low efficiency.
==============================
4/16/2021
initial recipe formulation
taking notes from northern brewer extra pale ale recipe
https://cdn.shopify.com/s/files/1/2785/6868/t/3/assets/AG-ExtraPaleAle-1526773845201.pdf?10657806027719427399

also from untitled 2 recipe : https://www.brewersfriend.com/homebrew/recipe/view/254312/untitled-2

Last Updated and Sharing
 
277
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2022-10-22 02:22 UTC
  • Snapshot Created: 2022-10-22 02:13 UTC