Block Party - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Block Party

159 calories 17.9 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: American Amber Ale
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 2.5 gallons
Post Boil Size: 1.5 gallons
Pre Boil Gravity: 1.096 (recipe based estimate)
Post Boil Gravity: 1.160 (recipe based estimate)
Efficiency: 70% (steeping grains only)
Calories: 159 calories (Per 12oz)
Carbs: 17.9 g (Per 12oz)
Created: Thursday April 21st 2022
1.048
1.014
4.4%
11.3
14.5
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Briess - LME Sparkling Amber Liquid6 lb LME Sparkling Amber Liquid 37.6 10 90.6%
6 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
0.50 lb American - Caramel / Crystal 80L0.5 lb Caramel / Crystal 80L 33 80 7.5%
0.13 lb American - Roasted Barley0.125 lb Roasted Barley 33 300 1.9%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Willamette1 oz Willamette Hops Pellet 4.5 Boil 60 min 11.31 100%
1 oz / $ 0.00
 
Yeast
Muntons - Gervin Ale
Amount:
1 Each
Cost:
Attenuation (avg):
70%
Flocculation:
Low
Optimum Temp:
61 - 72 °F
Starter:
No
Fermentation Temp:
68 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 79 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       CO2 Level: 2.65 Volumes
 
Target Water Profile
Edinburgh (Scottish Ale, Malty Ale)
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
100 18 20 45 105 235
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 2.62 g | 10.5 qt) 2.08 8.3  
Mash volume with grains (equipment estimates 2.62 g | 10.5 qt) 2.13 8.5  
Grain absorption losses (steeping) -0.08 -0.3  
Volume increase from sugar/extract (early additions) 0.49 2  
Pre boil volume (equipment estimates 3.04 g | 12.2 qt) 2.5 10  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.04 -0.2  
Post boil volume 1.5 6  
Top off amount 3.5 14  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 5.58 22.3
Equipment Profile Used: System Default
"Block Party" American Amber Ale beer recipe by hudddy. Extract, ABV 4.41%, IBU 11.31, SRM 14.49, Fermentables: (LME Sparkling Amber Liquid) Steeping Grains: (Caramel / Crystal 80L, Roasted Barley) Hops: (Willamette)
Last Updated and Sharing
 
276
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2022-06-10 14:54 UTC