Mona Lisa 2021 10 gal - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Mona Lisa 2021 10 gal

338 calories 39.5 g 12 oz
Beer Stats
Method: All Grain
Style: Russian Imperial Stout
Boil Time: 120 min
Batch Size: 10 gallons (fermentor volume)
Pre Boil Size: 16 gallons
Post Boil Size: 11 gallons
Pre Boil Gravity: 1.069 (recipe based estimate)
Post Boil Gravity: 1.100 (recipe based estimate)
Efficiency: 67% (brew house)
Source: Stone / BYO / Custom
Calories: 338 calories (Per 12oz)
Carbs: 39.5 g (Per 12oz)
Created: Wednesday May 5th 2021
Similar Recipes

Creamy Donut Pastry Stout

by Zerosopp

OG: 1.118 FG: 1.039 ABV: 10.4% IBU: 72

1.100
1.032
9.0%
66.7
40.0
5.3
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
26 lb US - Pale 2-Row26 lb Pale 2-Row 37 1.8 66.7%
4 lb Crisp Malting - Amber4 lb Amber 33.1 27.5 10.3%
2.50 lb American - Roasted Barley2.5 lb Roasted Barley 33 300 6.4%
2.50 lb American - Black Malt2.5 lb Black Malt 28 500 6.4%
4 lb Dry Malt Extract - Light4 lb Dry Malt Extract - Light 42 4 10.3%
39 lbs / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
2.60 oz Warrior2.6 oz Warrior Hops Pellet 16 Boil 60 min 66.66 100%
2.60 oz / 0.00
 
Yeast
Omega Yeast Labs - HotHead Ale OYL-057
Amount:
2 Each
Cost:
Attenuation (custom):
66%
Flocculation:
Medium High
Optimum Temp:
62 - 98 °F
Starter:
Yes
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 315 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.75 Volumes
 
Target Water Profile
henrico county va 23233 sept 2020
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
26 4 16 10 13 72
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
Batch Sparge -- 150 °F 60 min
Starting Mash Thickness: 1.5 qt/lb
Quick Water Requirements
Water Gallons  Quarts
WARNING: Boil kettle capacity (12 gal | 48 qt) exceeded. Volume required: 13.1 gal (52.39 qt). Suggest reducing initial water volume to 12 gal (48 qt) and adding 1.1 gal (4.39 qt) sparge/top-off.    
WARNING: Mash tun capacity exceeded. Volume required: 15.93 gal (63.7 qt). Suggest reducing strike water volume to 9.2 gal (36.8 qt) and adding 3.93 gal (15.7 qt) sparge/top-off. 13.13 52.5  
Strike water volume at mash thickness of 1.5 qt/lb 13.13 52.5  
Mash volume with grains 15.93 63.7  
Grain absorption losses -4.38 -17.5  
Remaining sparge water volume (equipment estimates 4.29 g | 17.1 qt) 7.19 28.8  
Mash Lauter Tun losses -0.25 -1  
Volume increase from sugar/extract (early additions) 0.31 1.2  
Pre boil volume (equipment estimates 13.1 g | 52.4 qt) 16 64  
Boil off losses -3 -12  
Hops absorption losses (first wort, boil, aroma) -0.1 -0.4  
Post boil Volume (equipment estimates 10 g | 40 qt) 11 44  
WARNING: Exceeded batch size - reduce boil size    
Going into fermentor (equipment estimates 11 g | 44 qt) 10 40  
Total: 20.31 81.3
Equipment Profile Used: System Default
 
Notes

===============================
5/5/21
splitting this out into an official 10 gallon recipe since that is what we did.

without the extract it appears we only got 60% efficiency to get to 1.075. the efficiency goes up to 67 after adding the dme. on this recipe we also have a higher IBU (66) than the 5 gallon recipe.

still doesnt make much sense that we had 17.5 lb grain per 5 gallons and only got to 1075.

also im not sure why the efficiency changes when you add the DME, i guess that makes sense...it averages in....
===============================
5/1/21
Not sure what happened only came to 1.100 OG even after the 2 hour boil and DMe. It was 1075 before the DME.

Last minute adding 2 lb base malt and reducing DME. Gonna play by ear how much dme to add
===============================
4/30/21
booting this back up for big brew day with ryan tomorrow. we are doing two 5 gallon mash sparges into my 15 gallon kettle to boil all at once so that could change things. im expecting better efficiency even without the dry malt extract. plan to boil 90 minutes, check gravity, then potentially add 3 or 6 lbs total DME for the 10 gallon batch. i think we will need 14 gallons to start, boil down to 11 or 11.5, leave 1 behind for trub.
===============================
5/25/2020
FG 1.036 (cold sample)
appears the starter wasnt necessary and didnt do anything anyway. Hit an official 10%
===============================
5/11/2020
SG 1.036 - made a 2x starter from a new hothead pack and tossed half of it into the batch.
===============================
5/2/2020
SG 1.041
===============================
4/27/2020
SG 1.045 fermented like crazy the first couple days just off the kveik pack no starter.
===============================
4/16/2020
brew day. Idk what just happened I hit 1.112 and high volume really, couldnt tell exact because of the foam but maybe it was only 5. I guess eff prob goes up if u add a lot of DME. This could be disaster or awesome
===============================
4/15/2020
just changing the batch size from 6.5 down to 5.5 and taking the 2row down from 15lb to 12lb to still arrive at 10%. considering using kviek yeast for this....

===============================
3/24/2020
revamping this for another attempt. shamefully adding dme and predicting over 70 eff to land at 10%. other than that no real changes. worried it might be too bitter hoppy? would like to NOT split the batch and just do 2 vanilla beans. bourbon oak would be nice but i feel that the failure of the last batch was from trying to do too much at once.
===============================
9/30/19
brewed this on the road, came out with more than 6 gallons at 1.080 which was a mistake shouldve boiled longer. also used some old hops which may be putting off strange flavors.

9/23/19
base recipe is Stone RIS clone found in byo magazine. recipe is scant, and doesnt really add up : https://byo.com/recipe/stone-imperial-russian-stout-clone/ . posted recipe is for 65% efficiency so actually less efficient than my system but i added a pound more base malt anyway to try to get over 10%abv. yeast is a little unclear wlp002 listed 65-70% attenuation so we will have to be perfect and hit 70% to get over 10%abv. but then this amounts to 1030 FG, recipe is listed at 1020. could use wlp007 english dry ale if hittin FG was a concern but i think extra sweetness in this beer is going to be ok.

==========MISC NOTES=============
mona lisa stout

ORANGE
austin homebrew
http://austinhomebrew.com/assets/images/RCPPDF/09611.pdf
1/4oz bitter
1/2oz sweet

https://brewgr.com/recipe/59297/chocolate-orange-stout-oatmeal-stout-recipe
fresh orange peel and juice
(essentially a whole orange)

mrbeer
https://www.mrbeer.com/barleys-brew-chocolate-orange-stout
4oz bakers unsweetened chocolate
2 medium oranges
take off the skins but not too much pith
they soak skins in 1/2 cup vodka, adding allof it
maybe use a thin glass so the vodka covers more

final thoughts
use the brewers peel sweet and bitter, soak in vodka with vanilla bean
use thin glass
add the whole thing
optional : plus the orange juice


CHERRY
austin homebrew
http://austinhomebrew.com/assets/images/RCPPDF/02071.pdf
cherry flavoring

AHA
https://www.homebrewersassociation.org/homebrew-recipe/choc-full-o-cherry-porter/
frozen sour cherries

HBT
https://www.homebrewtalk.com/forum/threads/chocolate-cherry-stout.326884/
cherry juice concentrate
might be better in reducing sugar and other flavors....

final stand
a) i guess prob just use frozen cherries. not sour! sweet/dark any other kind than sour
b) cherry juice concentrate? how sour?
Dark cherries. Aha recipe calls for 5 to 10 lb per 10 gal batch. I think I will go with 5. For split batch 3.333


Last Updated and Sharing
 
501
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2021-05-14 18:39 UTC