Amount | Fermentable | Cost | PPG | °L | Bill % |
---|---|---|---|---|---|
700 lb | Dingemans - Belgian Pilsner Malt | 37 | 1.6 | 81.4% | |
30 lb | Gladfield - Biscuit Malt | 35 | 30.46 | 3.5% | |
30 lb | Aromatic Malt | 35 | 20 | 3.5% | |
100 lb | Belgian Candi Sugar - Clear/Blond (0L) | 38 | 0 | 11.6% | |
860 lbs / $ 0.00 |
Amount | Variety | Cost | Type | AA | Use | Time | IBU | Bill % |
---|---|---|---|---|---|---|---|---|
120 oz | Saaz | Pellet | 3.5 | Boil | 60 min | 22.06 | 100% | |
120 oz / $ 0.00 |
Wyeast - Belgian Abby Ale II 1762 | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||
$ 0.00 |
CO2 Level: 2.75 Volumes |
Ca+2 | Mg+2 | Na+ | Cl- | SO4-2 | HCO3- |
---|---|---|---|---|---|
42 | 11 | 16 | 21 | 59 | 80 |
knoxville adjusted with 100g gypsum, 100g epsom (roughly emulating westmale) |
Amount | Description | Type | Start Temp | Target Temp | Time |
---|---|---|---|---|---|
305 gal | Strike | 166 °F | 152 °F | 60 min | |
175 gal | Sparge | 170 °F | -- | -- | |
Starting Mash Thickness:
1.25 qt/lb Starting Grain Temp: 65 °F |
Water | Gallons | Quarts |
---|---|---|
WARNING: Boil kettle capacity (12 gal | 48 qt) exceeded. Volume required: 306 gal (1224 qt). Suggest reducing initial water volume to 12 gal (48 qt) and adding 294 gal (1176 qt) sparge/top-off. | ||
WARNING: Mash tun capacity exceeded. Volume required: 298.3 gal (1193.2 qt) | 237.5 | 950 |
Strike water volume at mash thickness of 1.25 qt/lb | 237.5 | 950 |
Mash volume with grains | 298.3 | 1193.2 |
Grain absorption losses | -95 | -380 |
Remaining sparge water volume | 199.57 | 798.3 |
Mash Lauter Tun losses | -0.25 | -1 |
Volume increase from sugar/extract (early additions) | 8.18 | 32.7 |
Pre boil volume (equipment estimates 306 g | 1224 qt) | 350 | 1400 |
Boil off losses | -1.5 | -6 |
Hops absorption losses (first wort, boil, aroma) | -4.5 | -18 |
Post boil volume (equipment estimates 344 g | 1376 qt) | 300 | 1200 |
Estimated amount in fermentor | 300 | 1200 |
Total: | 437.07 | 1748.3 |
Equipment Profile Used: | System Default |