Mill the grains and mix with 3.5 gallons (13.25 l) of 162°F (72°C) strike water to reach a mash temperature of 150°F (65°C). Hold this temperature for 60 minutes.

Vorlauf until your runnings are clear. Sparge the grains with 3.1 gallons (11.7 l) and top up as necessary to obtain 6 gallons (23 l) of wort. Boil for 75 minutes, following the hops schedule.

After the boil, turn off the heat and whirlpool for 10 minutes. Then chill the wort to slightly below fermentation temperature, about 68°F (20°C). Aerate the wort with pure oxygen or filtered air and pitch the yeast.

Ferment at 69°F (20°C) for 6 days, then increase the temperature to 72°F (21°C). and hold at that temperature for 4 more days. Once the beer reaches terminal gravity, bottle or keg the beer and carbonate to about 2.5 volumes of CO2. You may want to cold crash the beer to 35°F (2°C) for 48 hours before packaging to improve clarity.

This grist will give you a beer that is slightly on the paler end of the spectrum and uses relatively small amounts of character malts (Vienna, wheat, Caramunich) just to provide some nice grain/malt background. I like Vienna rather than Munich to avoid any “heavy” maltiness and give an increased perception of attenuation. Be sure to give this one time to ferment out fully—saison should be a dry beer!