The Sesh - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

The Sesh

171 calories 15.7 g 330 ml
brewer logo
Beer Stats
Method: BIAB
Style: English IPA
Boil Time: 45 min
Batch Size: 23.8 liters (ending kettle volume)
Pre Boil Size: 28 liters
Pre Boil Gravity: 1.029 (recipe based estimate)
Efficiency: 65% (ending kettle)
Calories: 171 calories (Per 330ml)
Carbs: 15.7 g (Per 330ml)
Created: Monday March 22nd 2021
Similar Recipes

Pilgrim challenger EIPA 2

by NathanUK

OG: 1.054 FG: 1.010 ABV: 5.8% IBU: 53

1.056
1.011
6.0%
49.9
10.2
n/a
44.18
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
3,000 g Voyager Craft Malt - Veloria Schooner3000 g Veloria Schooner $ 5.90 / kg
$ 17.70 		35.9 3.6 52.6%
800 g Voyager Craft Malt - Voodoo Schooner800 g Voodoo Schooner $ 9.70 / kg
$ 7.76 		35.9 43.2 14%
1,200 g Corn Sugar - Dextrose1200 g Corn Sugar - Dextrose - (late boil kettle addition) $ 3.50 / kg
$ 4.20 		42 0.5 21.1%
400 g Voyager Craft Malt - Winter Wheat Janz400 g Winter Wheat Janz $ 6.30 / kg
$ 2.52 		38.8 2.54 7%
300 g Maltodextrin300 g Maltodextrin - (late boil kettle addition) 39 0 5.3%
5,700 g / $ 32.18
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
25 g Yakima Chief Hops - Cascade LupuLN2 (Cryo)25 g Cascade LupuLN2 (Cryo) Hops $ 0.12 / g
$ 3.00 		Lupulin Pellet 12 Boil 45 min 35.32 25%
15 g Yakima Chief Hops - Cascade LupuLN2 (Cryo)15 g Cascade LupuLN2 (Cryo) Hops $ 0.12 / g
$ 1.80 		Lupulin Pellet 12 Boil 15 min 11.46 15%
10 g Yakima Chief Hops - Cascade LupuLN2 (Cryo)10 g Cascade LupuLN2 (Cryo) Hops $ 0.12 / g
$ 1.20 		Lupulin Pellet 12 Boil 5 min 3.07 10%
50 g Yakima Chief Hops - Cascade LupuLN2 (Cryo)50 g Cascade LupuLN2 (Cryo) Hops $ 0.12 / g
$ 6.00 		Lupulin Pellet 12 Dry Hop (High Krausen) 5 days 50%
100 g / $ 12.00
 
Other Ingredients
Amount Name Cost Type Use Time
1 g Whirlfloc Fining Boil 15 min.
8 g Irish Moss Fining Boil 15 min.
1 g Yeast Nutrient Other Boil 15 min.
1 g Go-Ferm Other Boil 15 min.
1 g CaCl2 Other Mash 2 hr.
 
Yeast
Fermentis - Safale - American Ale Yeast US-05
Amount:
11.50 Grams
Cost:
Attenuation (avg):
81%
Flocculation:
Medium
Optimum Temp:
12 - 25 °C
Starter:
Yes
Fermentation Temp:
22 °C
Pitch Rate:
1.5 (M cells / ml / ° P) 493 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       Amount: 0.66 bar       Temp: 2 °C       CO2 Level: 2.45 Volumes
 
Target Water Profile
Balanced Profile II
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
150 10 80 150 160 220
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
25 L (a) Protein rest, (b) Beta Amylase digestion, (c) Alpha Amylase digestion Strike 62 °C 62 °C --
3 L Sparge 78 °C 78 °C 10 min
Quick Water Requirements
Water Liters
Total strike volume 33.1
Mash volume with grains 35.9
Grain absorption losses -4.2
Mash Lauter Tun losses -0.9
Pre boil volume (equipment estimates 27.3 L) 28
Volume increase from sugar/extract (late additions) 1
Boil off losses -4.3
Hops absorption losses (first wort, boil, aroma) -0.3
Post boil volume (equipment estimates 24.5 L) 23.8
Estimated amount in fermentor 23.8
Total: 33.1  
Equipment Profile Used: System Default
 
Notes
  1. Yeast (SAFALE US05) is pitched in 300mL of Water + DME (100g) pre-boiled for 10 mins and chilled to 25 degrees Celsius. This is done 24 hours prior to the likely completion of the upcoming mash.

  2. The mash involves steeping all the grain in 28L of Water adjusted to pH 5.0 using CaCl2 and Citric acid. Remove 3L of water for sparging later after the mash. Begin to circulate the mash with the pump.
    The four heating stages include:
    (a) PROTEIN REST: Heating the mash to 40 degrees Celsius and slowly increasing the temperature gradient to 55 degrees over the course of 20 minutes.
    (b) BETA AMYLASE: Heat the mash to 62 degrees Celsius and hold this temperature for 40 minutes.
    (c) ALPHA AMYLASE: Heat the mash to 70 degrees Celsius and hold this temperature for 1 hour.
    (d) MASH OUT: Heat the mash to 78 degrees Celsius over the course of 5 minutes. Remove after 5 minutes has elapsed.

  3. Allow the grain to drain the mash back into the mash tun. Avoid squeezing the grains if possible, however light pressure over the BIAB bag can remove extra mash liquid and improve the yield.

  4. Boil the mash to 95 degrees Celsius and begin a 60 minute clock. Follow the hop schedule outlined in this protocol. Use the BREW function on Brewers Friend to help in the timing of the hop additions.

  5. At the 15 minute mark, provide the wort with the required amount of yeast nutrients, GoFerm, whirlfoc and Irish moss. pre-wet the Irish moss 10 minutes prior for maximum effect.

  6. At the end of the boil, begin the rapid cooling process with the ice chiller and immersion chiller.

  7. Continue the circulation process to aid in aeration.

  8. The yeast starter should have had 24 hours to grow, and now must be added to the cleaned and sterilized fermenter. CO2 is flushed through the fermenter several times to remove Oxygen.
    Using the pump and the 6mm tubing fitting, pump the wort into the fermenter, being sure to relieve pressure as it is filling.

  9. Ferment at RT for 7 days, with the spunding valve set at 15psi. Ensure that there is adequate head space for krausen formation.

  10. Dry hop AT High Krausen (Day 2). Slowly relieve pressure without causing over-foaming. Dry hop directly onto the Krausen and reseal the fermenter and bring back to 1 bar of pressure.

  11. Ensure that a secondary pressure fermenter has a filter/sieve attachment on the liquid line as a final pass for sediment. Clean and sanitize this new fermenter and then transfer the primary ferment into new secondary fermenter via Liquid line/Gas line transfer. Ensure that the primary fermenter is kept under an equilibrium of constant 1 bar pressure so as to not cause yeast cake unsettlement. Discard trub from primary fermentation.

  12. Pressurise to 2 bar and store/condition for 5 days before kegging.

  13. Cold crash at 0 degrees Celsius for 40-50 hours. After 12 hours of cooling, attach CO2 pressure line to equilibrate the vessel and prevent yeast cake unsettlement. Liquid-Liquid transfer to a Corny keg for immediate serving. Pressurise and keep at 2 degrees Celsius and 0.5bar.
Last Updated and Sharing
 
419
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2021-03-31 08:32 UTC