Spring Bock - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Spring Bock

234 calories 21.4 g 12 oz
Beer Stats
Method: All Grain
Style: Maibock/Helles Bock
Boil Time: 90 min
Batch Size: 6 gallons (ending kettle volume)
Pre Boil Size: 7.5 gallons
Pre Boil Gravity: 1.057 (recipe based estimate)
Efficiency: 70% (ending kettle)
Source: Landon Marshall
Calories: 234 calories (Per 12oz)
Carbs: 21.4 g (Per 12oz)
URL: https://www.homebrewersassociation.org/homebrew-recipe/may-the-bock-be-with-you/
Created: Saturday January 2nd 2021
1.071
1.014
7.4%
38.0
5.6
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
10 lb German - Pilsner10 lb Pilsner 38 1.6 60.6%
4.50 lb German - Vienna4.5 lb Vienna 37 4 27.3%
1.25 lb German - Acidulated Malt1.25 lb Acidulated Malt 27 3.4 7.6%
0.75 lb Viking - Caramel Pale0.75 lb Caramel Pale 35 3.6 4.5%
16.50 lbs / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.75 oz Magnum0.75 oz Magnum Hops Pellet 15 Boil 60 min 33.58 37.5%
0.50 oz Hallertau Mittelfruh0.5 oz Hallertau Mittelfruh Hops Pellet 3.75 Boil 15 min 2.78 25%
0.75 oz Hallertau Mittelfruh0.75 oz Hallertau Mittelfruh Hops Pellet 3.75 Boil 5 min 1.67 37.5%
2 oz / 0.00
 
Yeast
White Labs - German Bock Lager Yeast WLP833
Amount:
2 Each
Cost:
Attenuation (custom):
80%
Flocculation:
Medium
Optimum Temp:
48 - 55 °F
Starter:
Yes
Fermentation Temp:
-
Pitch Rate:
2.0 (M cells / ml / ° P) 785 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.45 Volumes
 
Target Water Profile
Pilsen (Light Lager)
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
7 3 2 5 5 25
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
Strike -- 104 °F --
3 gal Decoction -- -- --
3 gal Decoction -- -- --
Fly Sparge 172 °F -- 5 min
Starting Mash Thickness: 1.5 qt/lb
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.5 qt/lb 6.19 24.8  
Mash volume with grains 7.51 30  
Grain absorption losses -2.06 -8.3  
Remaining sparge water volume 3.63 14.5  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 8.33 g | 33.3 qt) 7.5 30  
Boil off losses -2.25 -9  
Hops absorption losses (first wort, boil, aroma) -0.08 -0.3  
Post boil volume (equipment estimates 5.18 g | 20.7 qt) 6 24  
Estimated amount in fermentor 6 24  
Total: 9.81 39.3
Equipment Profile Used: System Default
 
Notes

Heat 21.5 qt. (20.3 L) water to 104°F (40°C) and mash in the 13.8 lb. (6.3 kg) grist. This should lower the temperature to about 100°F (38°C). Let the mash rest for 30 minutes. Take about one-third of the mash as the first decoction. Use Dickmaische, which is the part with grist that settles at the bottom of the mash tun, heat it to 151°F (66°C), and rest for 20 minutes. After the rest, heat the decoction further to 162°F (72°C) for a 15-minute rest before you bring the decoction to a boil. Don’t forget to stir while heating. After a 15-minute boil, reunite the decoction with the remaining mash. Again, don’t forget to stir to avoid local overheating and enzyme destruction. The mash should now have a temperature of around 151°F (66°C). Rest for 10 minutes. Again, remove one-third of the mash from the mash tun. This time use Dünnmaische, the part with less grist, which will collect in the upper portion of the mash tun. Heat the decoction to 162°F (72°C) while stirring. Rest for 10 minutes before you bring the decoction to a boil. Boil for 15 minutes and reunite the mash in the mash tun while stirring. The mash should now reach around 162°F (72°C). Rest for 15 minutes and check saccharification with an iodine test. Heat the mash to 172°F (78°C) and hold a mash-out rest for about 10 minutes before you start lautering. Sparge with 172°F (78°C) water until the wort is diluted to a gravity of around 1.057 (14°P) in the kettle. Heat up for a 90-minute boil. Add 0.7 oz. (20 g) Magnum 30 minutes after the wort starts to boil. Add 0.4 oz. (10 g) Hallertauer Mittelfrüh 75 minutes into the boil. Add the last 0.7 oz. (20 g) Hallertauer Mittelfrüh 5 minutes before you finish the 90-minutes boil. Your wort should now have a gravity of 1.068 (16.5°P). Cool wort to about 48°F (9°C) and pitch the yeast. Let the temperature rise to about 50°F (10°C) and wait until the beer reaches a gravity of about 1.018 (4.5°P), before you transfer it to a secondary fermenter. Let the beer ferment under a top pressure of 16 psi (1.1 bar) for another 2 weeks before you cool it to about 32°F (0°C). Allow the beer to mature for at least another 5 weeks. If you bottle condition your brew, pitch at 48°F (9°C) and let the temperature rise to 50°F (10°C). Wait until the gravity doesn’t change for at least 3 consecutive days before you transfer the beer to your filling bucket. Add sugar for a carbonation of 4.5 g/L (if you ferment at 50°F/10°C, this should be 4.5 g sugar per liter).

Last Updated and Sharing
 
319
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2021-01-02 03:40 UTC