Crypt Keeper IPA - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Crypt Keeper IPA

200 calories 18.4 g 12 oz
Beer Stats
Method: All Grain
Style: American IPA
Boil Time: 90 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 7 gallons
Post Boil Size: 5.63 gallons
Pre Boil Gravity: 1.045 (recipe based estimate)
Post Boil Gravity: 1.061 (recipe based estimate)
Efficiency: 75% (brew house)
Source: Grains of Wrath
Hop Utilization: 99%
Calories: 200 calories (Per 12oz)
Carbs: 18.4 g (Per 12oz)
Created: Sunday November 1st 2020
1.061
1.012
6.4%
129.0
4.1
5.3
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
7.90 lb Rahr - Premium Pilsner7.9 lb Premium Pilsner 36.8 1.75 73%
1.44 lb Weyermann - Pale Wheat1.44 lb Pale Wheat 36 2 13.3%
11.40 oz Weyermann - Munich Type I11.4 oz Munich Type I 38 6 6.6%
2 oz Weyermann - Acidulated2 oz Acidulated 27 3.4 1.2%
10.40 oz Corn Sugar - Dextrose10.4 oz Corn Sugar - Dextrose - (late boil kettle addition) 42 0.5 6%
173.24 oz / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.68 oz Citra0.68 oz Citra Hops Pellet 11 Boil 80 min 31.06 5.5%
0.17 oz Citra0.17 oz Citra Hops Pellet 11 Boil 60 min 7.36 1.4%
0.68 oz Citra0.68 oz Citra Hops Pellet 11 Boil 5 min 5.87 5.5%
2.40 oz Citra2.4 oz Citra Hops Pellet 11 Whirlpool at 180 °F 30 min 14.63 19.3%
8.50 oz Citra8.5 oz Citra Hops Pellet 11 Dry Hop Day 8 70.03 68.4%
12.43 oz / 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
2 g Chalk Water Agt Mash 1 hr.
2.80 g Calcium Chloride (dihydrate) Water Agt Mash 1 hr.
6.10 g Epsom Salt Water Agt Mash 1 hr.
9.50 g Gypsum Water Agt Mash 1 hr.
0.70 g Salt Water Agt Mash 1 hr.
2.10 g Slaked Lime Water Agt Mash 1 hr.
5.27 ml Lactic acid Water Agt Mash 1 hr.
 
Yeast
White Labs - California Ale Yeast WLP001
Amount:
1 Each
Cost:
Attenuation (avg):
76.5%
Flocculation:
Medium
Optimum Temp:
68 - 73 °F
Starter:
Yes
Fermentation Temp:
67 °F
Pitch Rate:
1.0 (M cells / ml / ° P) 283 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       Amount: 11.96 psi       Temp: 45 °F       CO2 Level: 2.25 Volumes
 
Target Water Profile
IPA by Brewfather
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
140 18 16 55 230 33
Adjust water for a 4:1 ratio of calcium sulfate to calcium
chloride.
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
3.82 gal Strike 164 °F 152 °F 45 min
4.97 gal Sparge 168 °F 168 °F 15 min
Starting Mash Thickness: 1.5 qt/lb
Starting Grain Temp: 65 °F
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.5 qt/lb 3.82 15.3  
Mash volume with grains 4.63 18.5  
Grain absorption losses -1.27 -5.1  
Remaining sparge water volume (equipment estimates 5.05 g | 20.2 qt) 4.71 18.8  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 7.35 g | 29.4 qt) 7 28  
Volume increase from sugar/extract (late additions) 0.05 0.2  
Boil off losses -2.25 -9  
Hops absorption losses (first wort, boil, aroma) -0.06 -0.2  
Post boil Volume (equipment estimates 5.09 g | 20.4 qt) 5.63 22.5  
Hops absorption losses (whirlpool, hop stand) -0.09 -0.4  
WARNING: Exceeded batch size - reduce boil size    
Going into fermentor (equipment estimates 5.54 g | 22.2 qt) 5 20  
Total: 8.52 34.1
Equipment Profile Used: System Default
 
Notes

Here is a homebrew-scale recipe for Grains of Wrath’s Citra-hopped West Coast–style IPA, which scored a 99 with our blind panel earlier this year, delighted our editors, and became one of our Best 20 Beers of 2020. According to Mike Hunsaker, cofounder and brewer, the beer “brings bright citrus and tropical notes balanced with a smooth, easy malt back.”

Mill the grains and mash at 152°F (67°C) for 45 minutes, going for a mash pH between 5.2 and 5.3. Vorlauf until the runnings are clear, then run off into the kettle. Sparge and top up as necessary to get about 6.8 gallons (26 liters) of wort—or more, depending on your evaporation rate. Boil for 90 minutes, following the hops and additions schedule. After flameout, cool the wort to 180°F (82°C), add the whirlpool hops, spin the wort for 10 minutes, then rest for 20 minutes. Chill the wort to about 65°F (18°C), aerate well, and pitch the yeast. Ferment at 67°F (19°C). Three days after the beer reaches final gravity, rack to secondary (or remove yeast, if using a conical). After another day, add the dry hops. After 5 more days, do a force test to check for diacetyl (see “Hunting for Diacetyl,” beerandbrewing.com). After 2 days in a row of negative tests, crash, package, and carbonate.

Last Updated and Sharing
 
1,323
Views
1
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-11-24 14:24 UTC