Raspberry Beret - Frambozen - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Raspberry Beret - Frambozen

205 calories 20.8 g 12 oz
Beer Stats
Method: All Grain
Style: Fruit Beer
Boil Time: 80 min
Batch Size: 6 gallons (fermentor volume)
Pre Boil Size: 7.5 gallons
Post Boil Size: 6.25 gallons
Pre Boil Gravity: 1.052 (recipe based estimate)
Post Boil Gravity: 1.062 (recipe based estimate)
Efficiency: 75% (brew house)
Calories: 205 calories (Per 12oz)
Carbs: 20.8 g (Per 12oz)
Created: Saturday September 19th 2020
1.062
1.015
6.1%
15.7
16.4
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
9.86 lb Belgian - Pale Ale9.86 lb Pale Ale 38 3.4 74.4%
1.31 lb Dark Munich1.31 lb Dark Munich 36 10 9.9%
1.31 lb American - Caramel / Crystal 80L1.31 lb Caramel / Crystal 80L 33 80 9.9%
0.13 lb American - Chocolate0.13 lb Chocolate 29 350 1%
0.38 lb American - Carapils (Dextrine Malt)0.38 lb Carapils (Dextrine Malt) 33 1.8 2.9%
0.26 lb Corn Sugar - Dextrose0.26 lb Corn Sugar - Dextrose 42 0.5 2%
13.25 lbs / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.36 oz Nugget0.36 oz Nugget Hops Pellet 14 Boil 60 min 15.73 100%
0.36 oz / 0.00
 
Yeast
Wyeast - American Ale 1056
Amount:
1 Each
Cost:
Attenuation (avg):
75%
Flocculation:
Med-Low
Optimum Temp:
60 - 72 °F
Starter:
No
Fermentation Temp:
50 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 121 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.5 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
4.06 gal Strike 168 °F 154 °F 60 min
Starting Mash Thickness: 1.25 qt/lb
Starting Grain Temp: 69 °F
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.25 qt/lb 4.06 16.2  
Mash volume with grains 5.1 20.4  
Grain absorption losses -1.62 -6.5  
Remaining sparge water volume (equipment estimates 5.81 g | 23.2 qt) 5.29 21.2  
Mash Lauter Tun losses -0.25 -1  
Volume increase from sugar/extract (early additions) 0.02 0.1  
Pre boil volume (equipment estimates 8.01 g | 32.1 qt) 7.5 30  
Boil off losses -2 -8  
Hops absorption losses (first wort, boil, aroma) -0.01 -0.1  
Post boil Volume (equipment estimates 6 g | 24 qt) 6.25 25  
WARNING: Exceeded batch size - reduce boil size    
Going into fermentor (equipment estimates 6.25 g | 25 qt) 6 24  
Total: 9.35 37.4
Equipment Profile Used: System Default
 
Notes

Scaled down from metric 7 gallon recipe ( At last minute )

Add raspberry puree in secondary.

Frambozen — a fruited brown ale of Belgian origin — was first brewed by New Belgium Brewing Company during the winter of 1992.

Our Frambozen is not a traditional Christmas beer in any sense, but the high gravity makes it a great winter warmer, and the full raspberry flavor gives you a refreshing memory of stopping to snack on wild raspberries during long mid-summer hikes.

If you would like to brew this beer at home, I would shoot for an OG of 1.064. The mash should be roughly 75 percent pale malt, 10 percent Munich malt, 4 percent sugar, 10 percent caramel malt, and 1 percent chocolate malt. Add corn sugar during the boil.

Bittering hops are very low. roughly 20 IBUs. Add these hops early in the boil. We hop very minimally for flavor or aroma as we find that the hops will conflict with the fruit characteristics of the finished beer. Ferment down to 1.014 FG, holding temperatures barely above 68° F. Use a neutral ale yeast (like Wyeast 1056) or a Belgian ale yeast, or even both. After fermentation rack your beer off the yeast and chill it around 30° F if possible.

After 2 weeks of aging, rack your beer (being careful not to transfer any sediment) onto raspberry pulp. This pulp should equal 20% of your total beer volume, so if you are making five gallons of beer, you should rack onto 1 gallon of pulp. If you use raspberry juice, decrease the amount to 10% of your total beer amount (1/2 gallon for a 5-gallon batch). The high alcohol content should eliminate any sanitation concerns but wash the berries as well as possible.

Rack off the raspberry pulp after about two weeks, then let your batch settle again for several days before bottling.

Last Updated and Sharing
 
231
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-09-19 22:54 UTC