Mike's beer - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Mike's beer

157 calories 14.1 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: No Profile Selected
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 6.5 gallons
Post Boil Size: 5.5 gallons
Pre Boil Gravity: 1.041 (recipe based estimate)
Post Boil Gravity: 1.048 (recipe based estimate)
Efficiency: 70% (steeping grains only)
Calories: 157 calories (Per 12oz)
Carbs: 14.1 g (Per 12oz)
Created: Monday September 7th 2020
1.048
1.009
5.1%
50.4
9.9
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
3.30 lb Briess - LME Golden Light3.3 lb LME Golden Light 37.6 4 43.4%
3.30 lb Liquid Malt Extract - Light3.3 lb Liquid Malt Extract - Light 35 4 43.4%
6.60 lbs / 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb American - Caramel / Crystal 60L1 lb Caramel / Crystal 60L 34 60 13.2%
0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Centennial1 oz Centennial Hops Pellet 10 Boil 60 min 37.63 50%
0.50 oz Cascade0.5 oz Cascade Hops Pellet 7 Boil 30 min 10.12 25%
0.50 oz Cascade0.5 oz Cascade Hops Pellet 7 Boil 5 min 2.63 25%
2 oz / 0.00
 
Yeast
Fermentis - Safale - American Ale Yeast US-05
Amount:
1 Each
Cost:
Attenuation (avg):
81%
Flocculation:
Medium
Optimum Temp:
54 - 77 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 87 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.47 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.65 g | 26.6 qt) 6.07 24.3  
Mash volume with grains (equipment estimates 6.65 g | 26.6 qt) 6.15 24.6  
Grain absorption losses (steeping) -0.13 -0.5  
Volume increase from sugar/extract (early additions) 0.55 2.2  
Pre boil volume (equipment estimates 7.08 g | 28.3 qt) 6.5 26  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.08 -0.3  
Post boil volume 5.5 22  
Going into fermentor 5.5 22  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 6.07 24.3
Equipment Profile Used: System Default
"Mike's beer" No Profile Selected beer recipe by rje45. Extract, ABV 5.09%, IBU 50.37, SRM 9.87, Fermentables: (LME Golden Light, Liquid Malt Extract - Light) Steeping Grains: (Caramel / Crystal 60L) Hops: (Centennial, Cascade)
Last Updated and Sharing
 
233
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-09-07 17:38 UTC