Blonde Ale - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Blonde Ale

180 calories 20.4 g 22 oz
brewer logo
Beer Stats
Method: Extract
Style: Blonde Ale
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 3 gallons
Post Boil Size: 1.5 gallons
Pre Boil Gravity: 1.090 (recipe based estimate)
Post Boil Gravity: 1.180 (recipe based estimate)
Efficiency: 70% (steeping grains only)
Source: Paul Schweizer
Calories: 180 calories (Per 22oz)
Carbs: 20.4 g (Per 22oz)
Created: Sunday August 9th 2020
1.054
1.016
5.0%
23.3
4.7
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
5 lb Liquid Malt Extract - Light5 lb Liquid Malt Extract - Light 35 4 66.7%
2 lb Dry Malt Extract - Wheat2 lb Dry Malt Extract - Wheat 42 3 26.7%
7 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
0.50 lb American - Carapils (Dextrine Malt)0.5 lb Carapils (Dextrine Malt) 33 1.8 6.7%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1.50 oz Crystal1.5 oz Crystal Hops Pellet 4.3 Boil 60 min 17.08 50%
1.50 oz Crystal1.5 oz Crystal Hops Pellet 4.3 Boil 10 min 6.19 50%
3 oz / $ 0.00
 
Yeast
Fermentis - Safbrew - General/Belgian Yeast S-33
Amount:
1 Each
Cost:
Attenuation (avg):
70%
Flocculation:
High
Optimum Temp:
54 - 77 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 88 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: dextrose       Amount: 5       Temp: 68 °F       CO2 Level: 4.04 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 2.6 g | 10.4 qt) 2.48 9.9  
Mash volume with grains (equipment estimates 2.6 g | 10.4 qt) 2.52 10.1  
Grain absorption losses (steeping) -0.06 -0.3  
Volume increase from sugar/extract (early additions) 0.58 2.3  
Pre boil volume (equipment estimates 3.11 g | 12.5 qt) 3 12  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.11 -0.5  
Post boil volume 1.5 6  
Top off amount 3.5 14  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 5.98 23.9
Equipment Profile Used: System Default
"Blonde Ale" Blonde Ale beer recipe by Paul Schweizer. Extract, ABV 4.97%, IBU 23.28, SRM 4.73, Fermentables: (Liquid Malt Extract - Light, Dry Malt Extract - Wheat) Steeping Grains: (Carapils (Dextrine Malt)) Hops: (Crystal)
Last Updated and Sharing
 
282
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-08-09 22:40 UTC