Marzen x2 - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Marzen x2

184 calories 17.6 g 12 oz
brewer logo
Beer Stats
Method: BIAB
Style: Märzen
Boil Time: 60 min
Batch Size: 12 gallons (fermentor volume)
Pre Boil Size: 13.2 gallons
Post Boil Size: 12 gallons
Pre Boil Gravity: 1.051 (recipe based estimate)
Post Boil Gravity: 1.056 (recipe based estimate)
Efficiency: 65% (brew house)
Source: Andy
Calories: 184 calories (Per 12oz)
Carbs: 17.6 g (Per 12oz)
Created: Thursday August 6th 2020
1.056
1.012
5.8%
21.5
10.4
2.5
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
12 lb Weyermann - Vienna Malt12 lb Vienna Malt 37 3.5 42.9%
8 lb Avangard - Light Munich8 lb Light Munich 37 8 28.6%
8 lb Avangard - Munich Dark8 lb Munich Dark 37.1 12 28.6%
28 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
3 oz Tettnanger3 oz Tettnanger Hops Pellet 4.5 Boil 60 min 21.18 75%
1 oz Tettnanger1 oz Tettnanger Hops Pellet 4.5 Boil 1 min 0.3 25%
4 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
11 g Calcium Chloride (dihydrate) Water Agt Mash 1 hr.
3.40 g Epsom Salt Water Agt Mash 1 hr.
4.20 g Gypsum Water Agt Mash 1 hr.
2 g Table Salt Water Agt Mash 1 hr.
 
Yeast
White Labs - German Lager Yeast WLP830
Amount:
2 Each
Cost:
Attenuation (custom):
77%
Flocculation:
Medium
Optimum Temp:
50 - 55 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
1.75 (M cells / ml / ° P) 1097 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       Amount: 12.29 psi       Temp: 38 °F       CO2 Level: 2.6 Volumes
 
Target Water Profile
Light colored and malty
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
60 5 10 95 55 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
16 gal Strike 156 °F 150 °F 60 min
Quick Water Requirements
Water Gallons  Quarts
WARNING: Boil kettle capacity (12 gal | 48 qt) exceeded. Volume required: 13.65 gal (54.6 qt). Suggest reducing initial water volume to 12 gal (48 qt) and adding 1.65 gal (6.6 qt) sparge/top-off.    
WARNING: Mash tun capacity exceeded. Volume required: 19.19 gal (76.76 qt). Suggest reducing initial strike volume to 9.76 gal (39.04 qt) and adding 7.19 gal (28.76 qt) sparge/top-off. 16.95 67.8  
Strike water volume (equipment estimates 17.4 g | 69.6 qt) 16.95 67.8  
Mash volume with grains (equipment estimates 19.64 g | 78.6 qt) 19.19 76.8  
Grain absorption losses -3.5 -14  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 13.65 g | 54.6 qt) 13.2 52.8  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.15 -0.6  
Post boil Volume 12 48  
Volume into fermentor 12 48  
Total: 16.95 67.8
Equipment Profile Used: System Default
 
Notes

https://www.homebrewersassociation.org/homebrew-recipe/klang-freudenfest-oktoberfest-grain/

For 5 gallons (18.93 L)
Fermentables
3.5 lb. (1.6 kg) Pilsner malt
3.5 lb. (1.6 kg) Munich malt
4 lb. (1.8 kg) Vienna malt
1 lb. (0.5 kg) aromatic Munich 20° L malt
0.33 lb. (150 g) CaraVienne malt
Hops
1.0 oz. (28 g) German Tradition pellet hops, 6% a.a. (60 min)
1.0 oz. (28 g) German Tettnanger pellet hops, 4% a.a (20 min)
Yeast
German lager yeast with sufficient yeast starter (465 billion cells)
Misc.
0.75 tsp. (3 g) Irish moss added 15 minutes before end of the boil (optional)
Recommended water profile, PPM (optional):
Ca: 75–125
Mg: 10
Total alkalinity: 100–150
SO4: 50–100
Cl: 100–150
RA: 0–50
SPECIFICATIONS
Original Gravity: 1.055 (13.6° P)
Final Gravity: 1.013 (3.3° P)
ABV: 5.6%
IBU: 27
SRM: 9
Boil Time: 60 minutes
Pre-boil Volume: 7 gal. (26.5 L)
Pre-boil Gravity: 1.048 (11.9° P)

Mash in at 129° F (54° C) for 5 minutes.
Ramp to 150° F (63° C) and hold for 30 minutes.
Run a single decoction mash: remove 40% of the grain and heat it separately to 158–162° F (70–72° C) for 15 minutes, then bring to a boil for 5–10 minutes and return to the mash.
Mash out at 167° F (75° C) for 5–10 minutes.
Bring to a rolling boil for 60 minutes, adding hops at specified intervals from end of boil.
Ferment in primary for 14–20 days at 52° F (11° C).
Hold a diacetyl rest for three days at 57–59° F (14–15° C).
Gradually lower to 48° F (9° C) and hold for 8 days.
Gradually lower to 33° F (1° C) and hold another 16 days.
Keg at 2.5 volumes 5 (g/L) of CO₂ or bottle condition with 4 oz. (113 g) corn sugar.

_____________________
https://www.homebrewersassociation.org/homebrew-recipe/pickelhaube-marzen/

For 5.5 gallons (20.82 L)
5.5 lb (2.49 kg) Vienna malt
3.5 lb (1.59 kg) 10°L Munich malt
2.5 lb (1.13 kg) 20°L Munich malt
1.25 oz (35 g) Tettnang hop pellets,4.5% a.a. (FWH or 90 min)
0.25 oz (7 g) Tettnang hop pellets, 4.5% a.a. (15 min)
Bavarian or Munich lager yeast (2 L starter)
RO water treated with 1g/gallon calcium chloride
SPECIFICATIONS
Original Gravity: 1.056
Final Gravity: 1.010
ABV: 6%
IBU: 23.5
SRM: 10
DIRECTIONS
To brew the Pickelhaube Märzen, mash in for a protein rest at 122°F (50°C) for 20 minutes. Pull your first decoction of about 9 quarts (9 L) and boil for 15 minutes. Add back to main mash and equalize at 150°F (66°C). Hold at that temperature for 60 minutes. Apply heat or boiling water to mash out at 168°F (76°C) for 10 minutes.

Sparge, boil 90 minutes, and add hops at stated intervals.

Chill and oxygenate when wort temperature falls below 80°F (27°C). Pitch a strong starter of yeast at 48°F (9°C).

Fermentation temperature may be allowed to rise to 50°F (10°C). As fermentation slows, bring to 55°F (13°C) and hold three days for a diacetyl rest.

When the gravity reaches 1.012 (3°P), crash to lager temperatures (35°F or 2°C) and lager the beer for two to three months or until Oktoberfest.

Last Updated and Sharing
 
381
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-08-14 16:16 UTC