Empty the Cabinets IPA - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Empty the Cabinets IPA

145 calories 15 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: No Profile Selected
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 6.5 gallons
Post Boil Size: 5 gallons
Pre Boil Gravity: 1.038 (recipe based estimate)
Post Boil Gravity: 1.049 (recipe based estimate)
Efficiency: 70% (steeping grains only)
Calories: 145 calories (Per 12oz)
Carbs: 15 g (Per 12oz)
Created: Friday July 31st 2020
1.044
1.011
4.4%
69.3
5.7
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Briess - LME Pale Ale6 lb LME Pale Ale 34.5 6 80%
6 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb American - Pale 6-Row1 lb Pale 6-Row 35 1.8 13.3%
0.50 lb German - CaraFoam0.5 lb CaraFoam 37 1.8 6.7%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.50 oz Chinook0.5 oz Chinook Hops Pellet 13 Boil 60 min 25.11 16.7%
0.50 oz Chinook0.5 oz Chinook Hops Pellet 13 Boil 30 min 19.29 16.7%
1 oz Chinook1 oz Chinook Hops Pellet 13 Boil 15 min 24.92 33.3%
1 oz Chinook1 oz Chinook Hops Pellet 13 Boil 0 min 33.3%
3 oz / $ 0.00
 
Yeast
Wyeast - American Ale 1056
Amount:
1 Each
Cost:
Attenuation (avg):
75%
Flocculation:
Med-Low
Optimum Temp:
60 - 72 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 80 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       CO2 Level: 0 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.29 g | 25.2 qt) 6.18 24.7  
Mash volume with grains 6.3 25.2  
Grain absorption losses (steeping) -0.19 -0.8  
Volume increase from sugar/extract (early additions) 0.51 2  
Pre boil volume (equipment estimates 6.61 g | 26.5 qt) 6.5 26  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.11 -0.5  
Post boil volume 5 20  
Top off amount 0.5 2  
Going into fermentor 5.5 22  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 6.68 26.7
Equipment Profile Used: System Default
"Empty the Cabinets IPA" No Profile Selected beer recipe by Stevek23. Extract, ABV 4.38%, IBU 69.32, SRM 5.69, Fermentables: (LME Pale Ale) Steeping Grains: (Pale 6-Row, CaraFoam) Hops: (Chinook)
Last Updated and Sharing
 
230
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-07-31 11:49 UTC