White Legs Jalapeño Wheat clone - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

White Legs Jalapeño Wheat clone

8567 calories 764.4 g 19 L
Beer Stats
Method: All Grain
Style: Spice, Herb, or Vegetable Beer
Boil Time: 60 min
Batch Size: 21 liters (fermentor volume)
Pre Boil Size: 27 liters
Post Boil Size: 23 liters
Pre Boil Gravity: 1.042 (recipe based estimate)
Post Boil Gravity: 1.049 (recipe based estimate)
Efficiency: 70% (brew house)
Hop Utilization: 93%
Calories: 8567 calories (Per 19L)
Carbs: 764.4 g (Per 19L)
Created: Wednesday July 8th 2020
1.049
1.009
5.2%
11.5
3.6
5.6
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
2.40 kg American - Pilsner2.4 kg Pilsner 37 1.8 50%
2.40 kg Canadian - Pale Wheat2.4 kg Canadian - Pale Wheat 36 2 50%
4.80 kg / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
5.70 g Summit5.7 g Summit Hops Pellet 16.6 Boil 60 min 11.48 100%
5.70 g / 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
283 g Jalapeno Spice Primary 4 days
5 g Calcium Chloride (dihydrate) Water Agt Mash 1 hr.
1 g Epsom Salt Water Agt Mash 1 hr.
2 g Gypsum Water Agt Mash 1 hr.
0.50 g Salt Water Agt Mash 1 hr.
1 each whirlfloc Fining Boil 10 min.
 
Yeast
Fermentis - Safale - American Ale Yeast US-05
Amount:
1 Each
Cost:
Attenuation (avg):
81%
Flocculation:
Medium
Optimum Temp:
12 - 25 °C
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 89 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       Amount: -0.83 bar       Temp: 20 °C       CO2 Level: 0 Volumes
 
Target Water Profile
Light colored and malty
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
60 5 10 95 55 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
34 L No sparge Strike 73 °C 67 °C 60 min
Starting Mash Thickness: 3 L/kg
Starting Grain Temp: 20 °C
Quick Water Requirements
Water Liters
Strike water volume at mash thickness of 3 L/kg 14.4
Mash volume with grains 17.6
Grain absorption losses -4.8
Remaining sparge water volume (equipment estimates 18 L) 18.3
Mash Lauter Tun losses -0.9
Pre boil volume (equipment estimates 26.7 L) 27
Boil off losses -5.7
Hops absorption losses (first wort, boil, aroma) -0
Post boil Volume (equipment estimates 21 L) 23
WARNING: Exceeded batch size - reduce boil size  
Going into fermentor (equipment estimates 23 L) 21
Total: 32.7  
Equipment Profile Used: System Default
 
Notes

https://byo.com/recipe/tribute-brewing-co-s-white-legs-jalapeno-wheat-clone/

Try to keep the chloride-to-sulfate ratio at 2:1. Mash the grains at 152 °F (67 °C) for 60 minutes. Sparge and collect the wort, boil for 60 minutes, adding the hops at the beginning of the boil.

Cool and ferment at 65 °F (18 °C) until specific gravity is unchanged for three days. Prepare the raw peppers by soaking them in brewery cleaner then sanitizing, removing tops, cutting in half, and removing the pith of some jalapeño halves to control the heat as desired. Add the prepared peppers after primary fermentation is complete. When the desired flavor, aroma and heat level is reached (between three and seven days), package either in a keg to about 2.5 volumes of CO2 or in bottles with corn sugar.

Last Updated and Sharing
 
365
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-07-10 22:00 UTC