Timothy Taylor - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Timothy Taylor

146 calories 16.5 g 12 oz
brewer logo
Beer Stats
Method: All Grain
Style: Standard/Ordinary Bitter
Boil Time: 60 min
Batch Size: 6.5 gallons (fermentor volume)
Pre Boil Size: 8 gallons
Post Boil Size: 6.5 gallons
Pre Boil Gravity: 1.036 (recipe based estimate)
Post Boil Gravity: 1.044 (recipe based estimate)
Efficiency: 70% (brew house)
Calories: 146 calories (Per 12oz)
Carbs: 16.5 g (Per 12oz)
Created: Sunday June 7th 2020
1.044
1.013
4.1%
36.0
4.6
5.8
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
11 lb United Kingdom - Golden Promise11 lb Golden Promise 37 3 100%
11 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
2 oz Fuggles2 oz Fuggles Hops Pellet 4.5 Boil 60 min 29.95 50%
1 oz East Kent Goldings1 oz East Kent Goldings Hops Pellet 5 Boil 10 min 6.03 25%
1 oz Styrian Goldings1 oz Styrian Goldings Hops Pellet 5.5 Boil 0 min 25%
4 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
1 tbsp Five Star Chemicals - 5.2 pH Stabilizer Water Agt Mash 0 min.
0.50 tsp Wyeast - Beer Nutrient Other Boil 5 min.
1 each Whirlfloc Fining Boil 10 min.
 
Yeast
Wyeast - West Yorkshire 1469
Amount:
1 Each
Cost:
Attenuation (avg):
69%
Flocculation:
High
Optimum Temp:
64 - 72 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 94 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.44 Volumes
 
Target Water Profile
San Carlos 2012
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
3.7 gal Strike 165 °F 152 °F 60 min
Starting Mash Thickness: 1.33 qt/lb
Starting Grain Temp: 68 °F
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.33 qt/lb 3.66 14.6  
Mash volume with grains 4.54 18.2  
Grain absorption losses -1.38 -5.5  
Remaining sparge water volume (equipment estimates 6.12 g | 24.5 qt) 5.97 23.9  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 8.15 g | 32.6 qt) 8 32  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.15 -0.6  
Post boil Volume 6.5 26  
Going into fermentor 6.5 26  
Total: 9.63 38.5
Equipment Profile Used: System Default
 
Notes

From BYO: On brew day, prepare your ingredients; mill the grains, measure your hops, and prepare your water. This recipe uses reverse osmosis (RO) water. Add ¼ tsp 10% phosphoric acid per 5 gallons (19 L) of brewing water, or until water measures pH 5.5 at room temperature. Add 1 tsp. calcium chloride (CaCl2) to the mash. On brew day, mash in the Golden Promise at 152 °F (67 °C) in 13 qts. (12 L) of water, and hold this temperature for 60 minutes. Raise the temperature by infusion or direct heating to 168 °F (76 °C) to mashout. Recirculate for 15 minutes. Fly sparge with 168 °F (76 °C) water until 7 gallons (26.5 L) of wort is collected. Add ½ tsp. of calcium carbonate (CaCO3) to the kettle. Boil the wort very hard for 70 minutes, adding the hops at times indicated in the recipe. After adding the flameout hops, allow the hops to rest in the kettle for 40 minutes as the wort cools naturally. Chill to 66 °F (19 °C) and rack to the fermenter. Oxygenate, then pitch the yeast. Ferment at 68 °F (20 °C) until complete. Rack the beer, prime and bottle condition, or keg and force carbonate.

Last Updated and Sharing
 
175
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-06-07 00:45 UTC